On Sun, Nov 23, 2014 at 5:58 PM, Russell Senior <[email protected]> wrote: >>>>>> "Denis" == Denis Heidtmann <[email protected]> writes: > > Denis> dhcpc.1.devname=eth1 dhcpc.1.fallback=192.168.10.1 > Denis> dhcpc.1.fallback_netmask=255.255.255.0 dhcpc.1.status=enabled > Denis> dhcpc.status=enabled dhcpd.1.devname=eth0 dhcpd.1.dns.1.server= > Denis> dhcpd.1.dns.1.status=disabled dhcpd.1.dns.2.server= > Denis> dhcpd.1.dns.2.status=disabled dhcpd.1.dnsproxy=enabled > Denis> dhcpd.1.end=192.168.1.254 dhcpd.1.lease_time=600 > Denis> dhcpd.1.netmask=255.255.255.0 dhcpd.1.start=192.168.1.2 > Denis> dhcpd.1.status=enabled dhcpd.status=enabled > > Denis> I suspect that the .end line is what needs to change. But it > Denis> seems dangerous to edit this file and expect that it would work > Denis> just fine. > > Probably not dangerous. Edit the .end or the .start, or both. I would > think if the cfg file is a text file, you should be able to edit it and > "restore" that to the device. > > > -- > Russell Senior, President
Done. Now the problem is with the printer. It wants a net mask, I enter 255.255.255.000, yet the printer says I gotta be no higher than 255. Wha?? Try again tomorrow. -Denis _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
