On 01/15/2015 03:50 PM, Brian Martin wrote: > On 01/15/2015 03:46 PM, Dick Steffens wrote: >> === START OF READ SMART DATA SECTION === >> SMART Self-test log structure revision number 1 >> Num Test_Description Status Remaining >> LifeTime(hours) LBA_of_first_error >> # 1 Vendor (0x50) Completed without error 00% 0 - >> > That test hasn't completed yet. The one entry in the test report was > taken when the disk had 0 hours of power-up time (e.g. at the factory). > You should get another one that matches the current power-up time > when it's done.
The first time I ran the test I observed the instruction "Use smartctl -X to abort test." I did that. Maybe I wasn't supposed to. So, this time, instead of aborting the test, I ran the command you instructed me to use in your first e-mail. I got the same results. I started the test shortly after 2:00 PM, and ran the -l selftest at about 9:25 PM. rsteff@ThinkCentre-M58p:~$ sudo smartctl -t offline /dev/sda [sudo] password for rsteff: smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-18-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART off-line routine immediately in off-line mode". Drive command "Execute SMART off-line routine immediately in off-line mode" successful. Testing has begun. Please wait 625 seconds for test to complete. Test will complete after Thu Jan 15 16:14:26 2015 Use smartctl -X to abort test. rsteff@ThinkCentre-M58p:~$ sudo smartctl -l selftest /dev/sda [sudo] password for rsteff: smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-18-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0x50) Completed without error 00% 0 - -- Regards, Dick Steffens _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
