At 01:32 PM 4/7/2015, Rich Shepard wrote: > The flatbed scanner is plugged into a 4-port USB adapter that is connected >to a USB port on the rear of the system. The speakers are also plugged into >the 4-port adapter. > > The speakers work just fine. Xsane no longer finds the flatbed scanner >when plugged into any of the three available ports in the adapter. But, >plugging the scanner into a USB port on the front of the system, xsane >immediately finds it and opens without asking me which of the two entries >for the same scanner to use. > > Any thoughts on what might be happening here? > >Puzzled, > >Rich
If the scanner is powered by USB, my guess would be that is the problem. Try powering the hub if it has a power jack (or get one with a 5v power supply). Thanks JK >_______________________________________________ >PLUG mailing list >[email protected] >http://lists.pdxlinux.org/mailman/listinfo/plug _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
