I just realized that 2672 was the PID, went in and killed it,
now I am able to do what I was trying to do...

Tnx for the guidance..


On Sat, Aug 20, 2022 at 8:18 PM Chuck Hast <[email protected]> wrote:

> Netstat returns this:
> udp        0      0 0.0.0.0:69              0.0.0.0:*
>       2672/in.tftpd
> But I cannot find the thing...
>
>
> On Sat, Aug 20, 2022 at 8:04 PM Chuck Hast <[email protected]> wrote:
>
>> I have tried that with no luck. I did find a tftpd program running
>> but I removed it but still when I try to run dnsmasq it comes back
>> failing with the same error.
>> Here is what the ss command shows me:
>> kp4djt@kp4djt-T420:~$ ss -lnper | grep :69
>> udp    UNCONN  0       0         0.0.0.0:69         0.0.0.0:*
>>  ino:46376 sk:92 <->
>> udp    UNCONN  0       0            [::]:69            [::]:*
>>  ino:46377 sk:97 v6only:1 <->
>> The upper one is the one that is causing problems. The lower one is ipv6,
>> I do not have any other tftpd sessions running that I know of. I have
>> tried
>> to check, the only one that showed up was the tftpd program which I have
>> removed.
>>
>>
>> On Sat, Aug 20, 2022 at 7:38 PM Russell Senior <[email protected]>
>> wrote:
>>
>>> The "lsof" command will tell you what process is holding the port.
>>>
>>> On Sat, Aug 20, 2022 at 5:20 PM Chuck Hast <[email protected]> wrote:
>>>
>>> > Folks,
>>> > I am trying to follow some instructions to load a file into a
>>> > device using dns masque. The command is this:
>>> >
>>> > sudo dnsmasq -i eth0 -u joe --log-dhcp --bootp-dynamic
>>> > --dhcp-range=192.168.1.100,192.168.1.200 -d -p0 -K --dhcp-boot=rb.elf
>>> > --enable-tftp --tftp-root=/tftp/
>>> >
>>> >
>>> > Whe I try to execute it I get the following error message:
>>> > Dnsmasq:  Failed to create listening socket for port 69: address
>>> > already in use.
>>> >
>>> > I used ss and saw that there was a tfpd server that I had installed
>>> > ages ago, it was still there, I removed it but I still get the same
>>> error
>>> > I see that port is still shown using the ss command but I do not see
>>> > what is using it.
>>> >
>>> > Any suggestions?
>>> >
>>> > --
>>> >
>>> > Chuck Hast  -- KP4DJT --
>>> > I can do all things through Christ which strengtheneth me.
>>> > Ph 4:13 KJV
>>> > Todo lo puedo en Cristo que me fortalece.
>>> > Fil 4:13 RVR1960
>>> >
>>>
>>
>>
>> --
>>
>> Chuck Hast  -- KP4DJT --
>> I can do all things through Christ which strengtheneth me.
>> Ph 4:13 KJV
>> Todo lo puedo en Cristo que me fortalece.
>> Fil 4:13 RVR1960
>>
>>
>
> --
>
> Chuck Hast  -- KP4DJT --
> I can do all things through Christ which strengtheneth me.
> Ph 4:13 KJV
> Todo lo puedo en Cristo que me fortalece.
> Fil 4:13 RVR1960
>
>

-- 

Chuck Hast  -- KP4DJT --
I can do all things through Christ which strengtheneth me.
Ph 4:13 KJV
Todo lo puedo en Cristo que me fortalece.
Fil 4:13 RVR1960

Reply via email to