>From the Bootdisk-HOWTO or /usr/share/doc/lilo-0.21.5.1/README.bz2
LI The first stage boot loader was able to load the second stage boot
loader, but has failed to execute it. This can either be caused by a
geometry mismatch or by moving /boot/boot.b without running the map
installer.
Is your disk a seagate using DiskManager, DiskWizard or the like?
You could also check if your boot partition is completely under cylinder
1024, in which case, your BIOS is at fault.
The Large-Disk HOWTO at /usr/doc/HOWTO/mini/Large-Disk may have something
to say about LBA or sector remapping.
On 2001.02.04 13:38:37 +0800 [EMAIL PROTECTED] wrote:
> I installed my red hat 6.2 on a different partition. I have Windows NT
> installed in my pc. I decided to have a dual boot system. I was able to
> use the "dd" command and copy the bootsect.lnx file. I configured the
> boot.ini file and created a new entry on the startup screen from
> RedHat. When i reboot and choose the Red Hat entry I have created, "LI"
> appears and hangs from there. It does not continue. What could be the
> problem here? Thanks!
>
> JEIBI
Paolo Carballo
= http://www.mydestiny.net/~jplc/ GnuPG 1.0.4 KeyID 1EAD657C
= Linux *is* user-friendly. It's just selective about it's friends.
_
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
