try adding the line lba32 in your /etc/lilo.conf and run /sbin/lilo
On Sun, 4 Feb 2001, Paolo Carballo wrote:
> >From the Bootdisk-HOWTO or /usr/share/doc/lilo-0.21.5.1/README.bz2
>
> LI The first stage boot loader was able to load the second stage boot
> loader, but has failed to execute it. This can either be caused by a
> geometry mismatch or by moving /boot/boot.b without running the map
> installer.
>
> Is your disk a seagate using DiskManager, DiskWizard or the like?
> You could also check if your boot partition is completely under cylinder
> 1024, in which case, your BIOS is at fault.
> The Large-Disk HOWTO at /usr/doc/HOWTO/mini/Large-Disk may have something
> to say about LBA or sector remapping.
>
> On 2001.02.04 13:38:37 +0800 [EMAIL PROTECTED] wrote:
> > I installed my red hat 6.2 on a different partition. I have Windows NT
> > installed in my pc. I decided to have a dual boot system. I was able to
> > use the "dd" command and copy the bootsect.lnx file. I configured the
> > boot.ini file and created a new entry on the startup screen from
> > RedHat. When i reboot and choose the Red Hat entry I have created, "LI"
> > appears and hangs from there. It does not continue. What could be the
> > problem here? Thanks!
> >
> > JEIBI
>
> Paolo Carballo
>
> = http://www.mydestiny.net/~jplc/ GnuPG 1.0.4 KeyID 1EAD657C
> = Linux *is* user-friendly. It's just selective about it's friends.
>
> _
> Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
> To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
>
--------------------------------------
William Emmanuel S. Yu
Ateneo Cervini-Eliazo Networks (ACENT)
email : [EMAIL PROTECTED]
web : http://cersa.admu.edu.ph/
phone : 63(2)4266001-5925/5904
Flattery will get you everywhere.
_
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
