Jeffrey,
yes, that collision are propagated to all ports because hubs function as
amplifiers and cause one domain collision, hub to hub connections will
cause u a one domain collision.... if you want to segregate collision
domains used switch between to hubs, if you have a lot workstation
connected....
oninz <--{^0^}
Jeffrey Wong
>
> I am not familiar with how HUBs are internally(physically)
> interconnected.
>
> What I know is that pin1 is Tx+ and pin2 is TX- and pin3 is RX+ and
> pin6 is RX-. So at the very least the device's communication
> (connected to the hub using a cross-over cable) would be messed up.
> TX+ and TX- connected to the hub's TX+ and TX- would cause collision at
> least at the port where the device is connected to the hub. Not sure
> if this collision would be propagated across all the other ports of the
> hub.
-----------------------------------------
This email was sent using SquirrelMail.
"Webmail for nuts!"
http://squirrelmail.org/
_
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
To subscribe to the Linux Newbies' List: send "subscribe" in the body to
[EMAIL PROTECTED]
