Hi, Allan: Saw your post... without follow-ups. I wonder if you have found the answer?
I'm considering to get a 1U box with SCA hot swap bays + 10k SCSI... And, it runs Red Hat. What about booting after one disk fails? Do you leave the boot block on the floopy or ? Thanks Tom >i've read the software-raid-howto and it seems that >the author hasn't tested using raid with SCA >(hot-swap). does someone have experience with hot-swap >raid? i have 3 10k rpm scsi disks on hot-swap >backplane running on rh7.3. after software raid was in >place, i pulled out one disk. in /proc/mdstat, it was >recognized that /dev/sdb3 failed. i then inserted the >disk again and ran raidhotadd /dev/md2 /dev/sdb3. the >error was "Device is busy". i had to reboot to >reconstruct the raid array. this is unacceptable. i >know this is not a new technology and i believe >.someone out there has done and solved this problem. _ Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph To leave: send "unsubscribe" in the body to [EMAIL PROTECTED] Fully Searchable Archives With Friendly Web Interface at http://marc.free.net.ph To subscribe to the Linux Newbies' List: send "subscribe" in the body to [EMAIL PROTECTED]
