apt-get install wireless-tools On 5/17/05, Michael Huston <[EMAIL PROTECTED]> wrote: > Sorry about the last e-mail; I seem to have pressed a wrong button > before I completed it. I am almost to the point where it will work, but > I need just a tad. According to the start_net script that came with the > driver, I don't have iwconfig. I would like to know how I would get > iwconfig. I have wireless internet set up in my kernel and I have the > prism driver. > > How would I install iwconfig? > > Using Debian with kernel 2.6.8 (built last night). > > Thanks in advance, > Mike > > --- Michael Huston <[EMAIL PROTECTED]> wrote: > > > According to lsmod, it is an acx 111 chipset, which should work with > > the prism driver, I just can't get it to. When I do lsmod, it shows > > the > > driver to be loaded, but when I do an ifconfig -a it shows eth0, lo, > > and sit0. I believe that sit0 is just a bridge from IP4 to IP6, > > right? > > Anyway, Prism54 shows up in my lsmod, but not in my ifconfig -a. The > > card shows up in an lspci as network controller: Texas Instruments > > ACX > > 111 54Mbps Wireless interface. > > > > I have checked, and the chipset seems to be supported; it would be > > supported natively if I were masochistic enough, I would load Suse. > > The > > driver is installed in the default install of suse, but that seems a > > little nasty to me. I loathe YAST! > > > > Please help, > > Mike > > PS Thanks for the help. > > > > --- shadoi <[EMAIL PROTECTED]> wrote: > > > > > If it's made in China, it won't work as that's a Marvell chipset > > and > > > not > > > the Prism. I had the same problem with the later "version 2" cards > > > (I > > > think I had a rev. C) > > > > > > If you can run "modprobe prism54" and do "ifconfig -a" and see the > > > interface then you're in business. If so then you just need to add > > > (at > > > a minimum) "iface wlan0 inet dhcp" to your interfaces file and run > > > ifup > > > wlan0. If you need SSID and/or WAP setup then that's more > > involved. > > > > > > I'd recommend installing ifplugd and linux-wlan-ng as it works > > > wonderfully with a prism card. Prismstumbler is also fun. :) > > > > > > -Blake > > > > > > > > > Michael Huston wrote: > > > > > > >I have just instaled kernel 2.6.8 and made sure to load the Prism > > > >module so that I could use the wireless card that bought today. It > > > is a > > > >Netgear WG311 Version 2. According to the site, that should work. > > I > > > >don't know how to check it, to see if it is correctly installed. I > > > also > > > >don't know how to set up the /etc/network/interfaces file. I would > > > >appreciate it if someone would point me in the right direction. > > > > > > > >Any links on what to do? > > > >Mike > > > >.===================================. > > > >| This has been a P.L.U.G. mailing. | > > > >| Don't Fear the Penguin. | > > > >| IRC: #utah at irc.freenode.net | > > > >`===================================' > > > > > > > > > > > > > > > > > > .===================================. > > > | This has been a P.L.U.G. mailing. | > > > | Don't Fear the Penguin. | > > > | IRC: #utah at irc.freenode.net | > > > `===================================' > > > > 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 > > [KT133/KM133] (rev 03) > > 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 > > [KT133/KM133 AGP] > > 0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo > > Super South] (rev 40) > > 0000:00:04.1 IDE interface: VIA Technologies, Inc. > > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) > > 0000:00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI > > USB 1.1 Controller (rev 16) > > 0000:00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI > > USB 1.1 Controller (rev 16) > > 0000:00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super > > ACPI] (rev 40) > > 0000:00:09.0 Multimedia video controller: Brooktree Corporation Bt878 > > Video Capture (rev 11) > > 0000:00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio > > Capture (rev 11) > > 0000:00:0a.0 Network controller: Texas Instruments ACX 111 54Mbps > > Wireless Interface > > 0000:00:0b.0 Multimedia audio controller: Creative Labs SB Live! > > EMU10k1 (rev 07) > > 0000:00:0b.1 Input device controller: Creative Labs SB Live! > > MIDI/Game Port (rev 07) > > 0000:00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > 0000:00:0d.0 Communication controller: Conexant HSF 56k HSFi Modem > > (rev 01) > > 0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 > > [GeForce2 MX/MX 400] (rev a1) > > > Module Size Used by > > nls_cp437 5760 1 > > isofs 37752 1 > > prism54 55260 0 > > firmware_class 10368 1 prism54 > > ipv6 262404 8 > > af_packet 22600 2 > > pcspkr 3688 0 > > rtc 12728 0 > > floppy 60304 0 > > 8139cp 20672 0 > > emu10k1_gp 3648 0 > > gameport 4736 1 emu10k1_gp > > snd_emu10k1 98312 0 > > snd_rawmidi 25316 1 snd_emu10k1 > > snd_seq_device 8264 2 snd_emu10k1,snd_rawmidi > > snd_ac97_codec 69508 1 snd_emu10k1 > > snd_util_mem 4608 1 snd_emu10k1 > > snd_hwdep 9476 1 snd_emu10k1 > > snd_bt87x 14536 0 > > snd_pcm 97480 2 snd_emu10k1,snd_bt87x > > snd_timer 25540 1 snd_pcm > > snd 57380 9 > > > snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_bt87x,snd_pcm,snd_timer > > snd_page_alloc 11720 3 snd_emu10k1,snd_bt87x,snd_pcm > > btaudio 17360 0 > > bt878 11636 0 > > tuner 19920 0 > > tvaudio 22348 0 > > msp3400 24020 0 > > bttv 154252 1 bt878 > > video_buf 22212 1 bttv > > i2c_algo_bit 9800 1 bttv > > v4l2_common 6208 1 bttv > > btcx_risc 4808 1 bttv > > i2c_core 24144 5 > > tuner,tvaudio,msp3400,bttv,i2c_algo_bit > > videodev 9984 1 bttv > > pci_hotplug 34352 0 > > via_agp 9088 1 > > uhci_hcd 32784 0 > > usbcore 118308 3 uhci_hcd > > emu10k1 83652 2 > > sound 83372 1 emu10k1 > > soundcore 10400 7 snd,btaudio,bttv,emu10k1,sound > > ac97_codec 18700 1 emu10k1 > > 8139too 26112 0 > > mii 5184 2 8139cp,8139too > > parport_pc 36932 0 > > parport 41544 1 parport_pc > > agpgart 34536 1 via_agp > > tsdev 7360 0 > > mousedev 10444 0 > > evdev 9600 0 > > capability 4616 0 > > commoncap 7296 1 capability > > psmouse 20232 0 > > ide_cd 42528 1 > > cdrom 40284 1 ide_cd > > ext3 126760 2 > > jbd 61784 1 ext3 > > mbcache 9284 1 ext3 > > ide_generic 1472 0 > > via82cxxx 13980 1 > > ide_disk 19264 4 > > ide_core 138724 4 ide_cd,ide_generic,via82cxxx,ide_disk > > sd_mod 21696 0 > > ata_piix 8132 0 > > libata 41412 1 ata_piix > > scsi_mod 124812 2 sd_mod,libata > > unix 28660 300 > > font 8448 0 > > vesafb 6688 0 > > cfbcopyarea 3840 1 vesafb > > cfbimgblt 3072 1 vesafb > > cfbfillrect 3712 1 vesafb > > > .===================================. > > | This has been a P.L.U.G. mailing. | > > | Don't Fear the Penguin. | > > | IRC: #utah at irc.freenode.net | > > `===================================' > > .===================================. > | This has been a P.L.U.G. mailing. | > | Don't Fear the Penguin. | > | IRC: #utah at irc.freenode.net | > `===================================' >
-- Joshua Simpson http://dataw0lf.org "If we don't believe in freedom of expression for people we despise, we don't believe in it at all." -Noam Chomsky .===================================. | This has been a P.L.U.G. mailing. | | Don't Fear the Penguin. | | IRC: #utah at irc.freenode.net | `==================================='
