I can see the desired access point. I know the key. I can not
connect. I use System -> Administration -> Networking to change the
wireless settings and it doesn't help.
[EMAIL PROTECTED]:~# iwlist eth1 scan
eth1 Scan completed :
Cell 01 - Address: 00:14:7C:5A:14:00
ESSID:"ASD"
Protocol:IEEE 802.11g
Mode:Managed
Frequency:2.462 GHz (Channel 11)
Quality:0/100 Signal level:-80 dBm Noise level:-256 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=100
Extra:atim=0
IE: WPA Version 1
Group Cipher : WEP-104
Pairwise Ciphers (2) : TKIP WEP-104
Authentication Suites (1) : PSK
--snip--
Cell 04 - Address: 00:14:7C:59:EA:80
ESSID:"ASD"
Protocol:IEEE 802.11g
Mode:Managed
Frequency:2.437 GHz (Channel 6)
Quality:0/100 Signal level:-80 dBm Noise level:-256 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=100
Extra:atim=0
IE: WPA Version 1
Group Cipher : WEP-104
Pairwise Ciphers (2) : TKIP WEP-104
Authentication Suites (1) : PSK
--snip--
[EMAIL PROTECTED]:~# iwconfig eth1
eth1 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s Tx-Power:25 dBm
RTS thr:2347 B Fragment thr:2346 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have tried to get this to work for months on Fedora Core 5 now
Ubuntu Edgy. I am using the ndiswrapper if that makes any difference.
I have read tutorial after tutorial without success. Can someone
please help me?
-Daniel
/*
PLUG: http://plug.org, #utah on irc.freenode.net
Unsubscribe: http://plug.org/mailman/options/plug
Don't fear the penguin.
*/
