Aesculus wrote: > It's really Telnet (Denon AVP protocol) but is carried over the ethernet > port. I wonder if some of your timing issues could be communications > port related? > > 31054 > > EDIT: Note I have never looked into or tried the Net::Telnet module
Most of my gear in the living room, including the receiver (AVR-X1300W) is hardwired over 1Gbps switch after being bridged over PowerLine (HomePlug) AV2 device @ 500 Mbps. The average ping times are in the 3ms range, so latency should not be an issue. At its worst, what tends to happen is the volume "snaps back" to a prior setting a second, or so, later after being changed, for example, the volume is changed, lets say, from a value of 80 to 50 only to snap back to 80 after playing for some (short) time interval (a second, or two) at 50. I have not yet put a marker in the debug log when something like this happens. On other occasions, sometimes the power-on sequence will miss, for example, switching to the right input, in my case it's preset-3, and sometimes a volume change is not registered at all. All of that, in my mind, is indicative of timing problems, and it could be simple LMS's single-threadness (not a word ;-) manifestation (and that's why it's so random), but otherwise, and most of the time, things are just fine. ------------------------------------------------------------------------ MarSOnEarth's Profile: http://forums.slimdevices.com/member.php?userid=69826 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
