zoolap;277935 Wrote: > I tried this with Freenas 0.686.2 and previous beta version (which I'm > running at home). 6.5 was working fine, but I noticed that > squeezecentre 7 was out on website, so I thought i'd give new one a > shot. I wiped out slimserver 6.5 folder on my home set up before going > with v7. > > Here's my setup at home (note note hd0 hd1 are just fro reference, not > correct naming convention): > Hd0: Compactflash card (1Gb) via IDE to Compactflash adapter (runs > freenas) > > Hd1: Fully formatted to standard GPT format and currently contains > several folders of flac albums. NOTE: Mount point, folder etc below > refer to this hard disk. > > User Accounts: > user: slimuser > Group: slimgroup (slimuser belongs to this) > > Service: > scp (sftp to upload files) > > Mount point: > data > > Folder (for slimserver/squeezecentre): > slimnas (owner is slimuser) > > Downloaded following from Michael's page: > slimnas-0.92.tgz > slimnas-install.sh > > Downloaded below file from slimdevices/logitech page: > squeezecenter-7.0.1-17830-noCPAN.tgz > > Copied over the above three files to: > > /mnt/data/slimnas > > Renamed "slimnas-0.92.tgz" > > I then go to the Advanced > Command section and execute the command: > > /bin/sh /mnt/data/slimnas/slimnas-install.sh > > At this point I get message: > > "Extracting Perl.... Please open go your Freenas' main menu.... Have > Fun!" > > I Refresh browser, then I go to "Squeezecentre" option on left-hand > menu. > > Then I get menu with "Services: SqueezeCenter" > > Next to Install are two options: > * Keep existing > * squeezecentre-7.0.1-17830-noCPAN.tgz > > I select "squeezecentre-7.0.1-17830-noCPAN.tgz" and click "Save" > > I check everything has extracted via winscp. > > Then select "keep existing..." > check "Enable" button. > > Wait a while and I still get message: > > Status (SlimNAS Version v0.92) > Failed: SqueezeCenter is not available. Please note that it might take > a minute or more for the service to be available after a restart. > Please refresh this page to check the status again. > > No amount of refreshing or rebooting fixes this. > > Note I've also tried replicating my setup within vmware - creating 2 > virtual disks (using 1st disk for installing freenas in embedded mode - > to emulate use on flash disk, and second disk for data and above > mentioned mount point and folder). > > The following is shown under "advanced > command scripts" > > /usr/local/bin/php -f > /mnt/data/slimnas/usr/www/services_slimserver_init.php > > If I execute this manually from the command section, I get: > ------------ > $ /usr/local/bin/php -f > /mnt/data/slimnas/usr/www/services_slimserver_init.php > X-Powered-By: PHP/5.2.5 > Content-type: text/html > > Parse error: syntax error, unexpected '*' in /usr/local/bin/php on line > 1150 > ------------ > > On this latest version of freenas, there is an extra box for "PHP > command", but I have no idea what to enter here. > > I've tried the chgrp and chmod ideas on my "slimnas" folder, but have > not got anything good out of it. > > Michael - not moaning or anything, greatly appreciate your efforts and > would be most happy if i can get anywhere with this.
On your vmware-install try to chmod your data and/or mnt folder too and see it that resolvs it (think I did that too). -- frippera ------------------------------------------------------------------------ frippera's Profile: http://forums.slimdevices.com/member.php?userid=15786 View this thread: http://forums.slimdevices.com/showthread.php?t=44039 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/plugins
