Dear Bernt and any other user that may help me please... As I said before, I understood the concept of Mout Point and shared folder but please tell me why it happens this way for me:
My Mount Poit is Sobra and the share folder named teste. Sobra is a partition in my disk (2) UFS on line. I put all the Slimnas files in the folder teste using the windows explorer. Then I wrote a command line in FreeNas: /bin/sh /mnt/Sobra/teste/slimnas-install.sh and the answer was the command line repeated in the gray area: $ /bin/sh /mnt/Sobra/teste/slimnas-install.sh and then I wrote another command line, without the folder name: /bin/sh /mnt/Sobra/slimnas-install.sh and I got this answer in the gray area: $ /bin/sh /mnt/Sobra/slimnas-install.sh Extracting Perl and supporting files... There has been a failure installing SlimNAS. for me that message means that the program slimnas-install.sh was found but did not work... is it true ? what am I doing wrong ? If helps, these are the log (last 50) Mar 23 20:12:04 kernel: uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 10 at device 31.2 on pci0 Mar 23 20:12:04 kernel: uhci0: [GIANT-LOCKED] Mar 23 20:12:04 kernel: usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 Mar 23 20:12:04 kernel: usb0: USB revision 1.0 Mar 23 20:12:04 kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Mar 23 20:12:04 kernel: uhub0: 2 ports with 2 removable, self powered Mar 23 20:12:04 kernel: ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 11 at device 31.3 on pci0 Mar 23 20:12:04 kernel: ichsmb0: [GIANT-LOCKED] Mar 23 20:12:04 kernel: smbus0: <System Management Bus> on ichsmb0 Mar 23 20:12:04 kernel: smb0: <SMBus generic I/O> on smbus0 Mar 23 20:12:04 kernel: uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 6 at device 31.4 on pci0 Mar 23 20:12:04 kernel: uhci1: [GIANT-LOCKED] Mar 23 20:12:04 kernel: usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 Mar 23 20:12:04 kernel: usb1: USB revision 1.0 Mar 23 20:12:04 kernel: uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Mar 23 20:12:04 kernel: uhub1: 2 ports with 2 removable, self powered Mar 23 20:12:04 kernel: speaker0: <PC speaker> port 0x61 on acpi0 Mar 23 20:12:04 kernel: ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 Mar 23 20:12:04 kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode Mar 23 20:12:04 kernel: ppc0: FIFO with 16/16/9 bytes threshold Mar 23 20:12:04 kernel: ppbus0: <Parallel port bus> on ppc0 Mar 23 20:12:04 kernel: ppi0: <Parallel I/O> on ppbus0 Mar 23 20:12:04 kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Mar 23 20:12:04 kernel: sio0: type 16550A Mar 23 20:12:04 kernel: sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 Mar 23 20:12:04 kernel: sio1: type 16550A Mar 23 20:12:04 kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 Mar 23 20:12:04 kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 Mar 23 20:12:04 kernel: kbd0 at atkbd0 Mar 23 20:12:04 kernel: atkbd0: [GIANT-LOCKED] Mar 23 20:12:04 kernel: pmtimer0 on isa0 Mar 23 20:12:04 kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 Mar 23 20:12:04 kernel: fdc0: No FDOUT register! Mar 23 20:12:04 kernel: sc0: <System console> at flags 0x100 on isa0 Mar 23 20:12:04 kernel: sc0: VGA <16 virtual consoles, flags=0x300> Mar 23 20:12:04 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Mar 23 20:12:04 kernel: Timecounter "TSC" frequency 1005030994 Hz quality 800 Mar 23 20:12:04 kernel: Timecounters tick every 10.000 msec Mar 23 20:12:04 kernel: ad2: 3093MB <FUJITSU MPB3032ATU 2009> at ata1-master UDMA33 Mar 23 20:12:04 kernel: ad3: 194481MB <Maxtor 6L200P0 BAH41G10> at ata1-slave UDMA100 Mar 23 20:12:04 kernel: GEOM_LABEL: Label for provider ad2s2 is ufs/Data. Mar 23 20:12:04 kernel: GEOM_LABEL: Label for provider ad3p1 is ufs/DISCO2. Mar 23 20:12:04 kernel: Trying to mount root from ufs:/dev/ad2s1a Mar 23 20:12:04 kernel: GEOM_LABEL: Label ufs/Data removed. Mar 23 20:12:04 kernel: GEOM_LABEL: Label ufs/DISCO2 removed. Mar 23 20:12:06 lighttpd[1011]: (log.c.75) server started Mar 23 20:12:08 login: login on ttyv0 as root Mar 23 20:12:21 kernel: ad3: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=258 Mar 23 20:13:14 smbd[1149]: [2008/03/23 20:13:14, 0] lib/util_sock.c:read_data(534) Mar 23 20:13:14 smbd[1149]: read_data: read failure for 4 bytes to client 192.168.0.103. Error = Connection reset by peer Thanks for any help Mawe bernt;282487 Wrote: > I think you got the path wrong. I have a mount point named 250G and a > share named data with a folder named slimnas. All files are saved in > slimnas. > > So the the command looks like this. > /bin/sh /mnt/250G/slimnas/slimnas-install.sh > > Note that the sharename is not in the path, only the mount point name > and the slimnas folder. Not the share name. > > Your commandline should look like this > /bin/sh /mnt/mount_point_name/slimnas/slimnas-install.sh > > You find the mount point name in FreeNAS under Disks > Mount Point. -- Mawe ------------------------------------------------------------------------ Mawe's Profile: http://forums.slimdevices.com/member.php?userid=16191 View this thread: http://forums.slimdevices.com/showthread.php?t=44039 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/plugins
