renkwist;326554 Wrote: > I have a dell vostro pc and a duet receiver. The receiver is connected > to pc via ethernet cable, and the controller talks directly to the > squeezebox (I dont have a wireless router). The pc has a wireless pc > card that gets wifi from my neighbors (with permission) which i use to > get squeezenetwork, radio, etc. > > Turning off with your plugin works perfectly. But on turn on, nada. > When the pc is off, the duet receiver stays blue. You may have to turn ethernet bridging on in the receiver for the SBC's WOL packet to make it from the SBR to the SC pc.
I'm not sure if bridging is enabled by default by the SBR when it sees that it has both a wired and wireless connection. If it's not, then you could use Robin's Net-UDAP tool to enable it. See http://forums.slimdevices.com/showthread.php?t=43722 and http://projects.robinbowes.com/Net-UDAP/trac/wiki When I was toying with a setup something like yours, I configured the SC pc to use a static address on the ethernet port, connected the SBR using a crossover cable, and used the Net-UDAP to set all the SBR parameters. It might be more straight forward to configure the SBR and the SBC to connect to your neighbor's WLAN and bridge the SBR's wifi & ethernet ports so that it can see the SC pc. That way you wouldn't need the wifi card in the SC pc. The SC pc would get its internet radio streams through the SBR's wlan connection. Also, other wifi enabled devices you might have (laptop, iPhone, etc) could control the SBR that way. -- gharris999 ------------------------------------------------------------------------ gharris999's Profile: http://forums.slimdevices.com/member.php?userid=115 View this thread: http://forums.slimdevices.com/showthread.php?t=48521 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/plugins
