pippin;558139 Wrote: > Actually I have no idea what the SB3 does (the IR remote does nothing), > but here's what iPeng does: > > iPeng sends a WOL broadcast message on port 3483. While this is NOT the > most common port to use it needs to be open for server discovery anyway > so it's usually a good choice. > Your router needs to allow broadcasts on that port and it needs to > distribute them across the network. This usually is an issue if you > have a combined WiFi and ethernet network and you use a different > subnet range for the two, e.g. if WiFi is on 192.168.0.x and ethernet > on 192.168.1.x while the respective subnet masks are set to > 255.255.255.0. While the router can route directed traffic in this > setup broadcasts will not get through. >
Thanks for the quick response pippin. My router is configured with a single subnet range, i.e. 192.168.1.x. I will use the D-Link forum to figure out how to further validate that port 3483 is properly open as I do not know how to this with the DSL-2740r that I am using. -- russelc ------------------------------------------------------------------------ russelc's Profile: http://forums.slimdevices.com/member.php?userid=37254 View this thread: http://forums.slimdevices.com/showthread.php?t=51929 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
