bpa;608305 Wrote: 
> Is this user a member of the Audio group ? otherwise it cannot access
> ALSA devices.

:-) It -was not- but it *is now!* 

I check the mixer to ensure *Capture* is turned on:

Here are the URL *wavin:*results when I:
1. Change the URL
2. Reload the SBS
3. Click [+] on the remote to clear the SB to *Nothing*
4. Click [*>*] in the left pane to send the signal to the SB
5. Click [*>*] in the right pane and play a tune that is heard on the
PC speakers:

*default* or *0*:
+ Messages appear:
..................Now Playing (Buffering xx%) WaveInput
..................xx = 56, 61, 71, etc.
+ Heavy 60 Hz hum, like you have on a regular audio system when a plug
is not fully pushed in (an open lead); volume dips instantaneously
every two seconds, no music
+ WI runs until I stop it.

*Anything else* (blank, 1, hw:0,0, hw:0,1, mon_mix):
+ Messages appear:
..................Now Playing (Connecting...) WaveInput
..................Now Playing (Buffering xx%) WaveInput
..................Problem: Can't open file for wavin:yyy

So only wavin:0 and wavin:default work at all, but neither plays the
signal.

If I listen very carefully I hear something under the hum that sounds
like a vocal song, while the one I test with is strictly instrumental.
I have no other music playing anywhere (PC, radio, CD, nowhere) other
than the test instrumental.

I then check the mixer (*kmix*is the only mixer I have running) to make
adjustments to get rid of the hum:

Nothing seems to have any effect.Muting the *PC speakers* or
deselecting *Capture* appears to kill the ghost signal I'm hearing with
about a five second latency. But the hum remains.

===

Thanks again - progress!

Cheers, Andy


-- 
alavarre1
------------------------------------------------------------------------
alavarre1's Profile: http://forums.slimdevices.com/member.php?userid=40597
View this thread: http://forums.slimdevices.com/showthread.php?t=49584

_______________________________________________
plugins mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/plugins

Reply via email to