agillis wrote: > I tested Inguz running on a VertexBox here. I was easy to install and it > seems to be running OK. I don't know enough about it to test it. > > I also built BruteFIR for VortexBox. I read that that it is a much > faster algorithm. > > As for green PCs we use ATOM based PCs. The one we use draws lest the 25 > watts. If you need more processing power you need a "Socket P" core 2 > chip. It draws about 25 watts just for the chip but has the power of a > regular Core 2.
I Have been playing with InGuz, and have it up and running. Just the EQ Settings seem to evade me. I can see the EQ GUI in the web GUI for at port 9000, but the EQ settings - not! Below please find excerpts from my correspondance with Hugh Pyle, the developer of InGuz. But he apparantly is not very well versed in VortexBox. I wonder if anyone in here have some good pointers for my problem... During installation I have success until this section http://inguzaudio.com/installation/debian/ >From the SlimServer web interface, select Server Settings -> Plugins. Verify that the EQ plugin is checked. IT is - Check! >From the SlimServer web interface, select Player Settings -> Menus. Verify that the Plugins menu or the EQ plugin are active. I dont see this option on my SB Duet... Is it only available for some SBs? Using the remote control, select the EQ menu (under Plugins). You will see a message indicating that SlimServer must be restarted. I dont see this... Restart SlimServer a second time. I already restarted the server multiple times to no avail. I cannot get to the menu where I should get access to the test-sounds (Sweep etc). ******** 2012/10/10 Morten Enevoldsen <[email protected]> I just dont see the option for making the sweep, like you explain here: EQ -> Settings -> Test Signals -> Left/Right Identifier 2012/10/10 Morten Enevoldsen <[email protected]> By the way I do see the EQ GUI in the Home/EQ screen, where I do the normal stuff, selecting, Type of Equalizer (2-9 point where also the screen works with Silverlight in the special graph that shows equalisation), the filter, quietness, width etc. Any idea what is not right here with my setup? Thanks ******** 2012/10/10 Morten Enevoldsen <[email protected]> High Hugh, Please I hope you can help me out here. I have everything installed and ready to start sweeping and recording these. However. I cannot find the place to select the test-tones/sweeps. I have read they should be at EQ/Settings/ select tone... However I have no such interface. I have the latest InGuz installed from your web-page. I have the plugin installed with a checkmark on the plugin page in SB Settings/Plugins. If I EQ select settings link on this pageNothing happens. The server just waits for something to happen, but nothing does happen. I think it is a permission issue on some folder. So I changed the folder permission on the Impulse folder [vortexbox.localdomain share]# chmod -R 777 /usr/share/InguzEQ [vortexbox.localdomain share]# chown -R root:root /usr/share/InguzEQ Please let me know where I have this GUI and if my command above was OK or if I should reinstate the original permissions on this folder. Thanks in advance - Best regards Morten E. ------------------------------------------------------------------------ excalibur's Profile: http://forums.slimdevices.com/member.php?userid=33971 View this thread: http://forums.slimdevices.com/showthread.php?t=74712
_______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
