PasTim wrote: > And what that -r blurb says is "Sample rates supported, allows output to > be off when squeezelite is started;......." > > With the onboard card it should be fine, just use a lower rate (eg 96000 > or less). My DAC is often not connected, which is why I use that > setting. > > It's very strange it doesn't show with a device that's always connected. > I assume you have the device selected, and it's running? There should > be a debug log that might help. > > Now I think about it, there was one tweak I had to apply to select a > device with the drop-down list, which was to add 'audio' to the groups > that squeezeboxserver belongs to, allow that user to access the audio > subsystem. If that works for you I'll suggest to Triode that he puts > that in the instructions.
Thanks. -r by itself wasn't working (player not running), but "-r 96000" works (or not using -r at all works). I can get the options in the dropdown player list without -r or with -r 96000. So I'm not having trouble with that issue. *Location 1:* VortexBox 4TB (2.3) > LMS 7.8 > Transporter, Touch, Boom, Radio w/Battery (all ethernet except Radio) *Location 2:* VBA 3TB (2.3) > LMS 7.8 > Touch > Benchmark DAC I, Boom, Radio w/Battery (all ethernet except Radio) *Office:* Win7(64) > LMS 7.8 > Squeezelite *Spares:* VBA 4TB, SB3, Touch (3), Radio (3), CONTROLLER *Controllers:* iPhone4S & iPad2 (iPeng7 & Squeezepad), CONTROLLER, or SqueezePlay 7.8 on Win7(64) laptop Ripping (FLAC) - dbpoweramp, Tagging - mp3tag, Streaming - Spotify ------------------------------------------------------------------------ garym's Profile: http://forums.slimdevices.com/member.php?userid=17325 View this thread: http://forums.slimdevices.com/showthread.php?t=97766 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
