You're running OSS. OSS does *not* support suspend/resume. You'll need
to contact the vendor for that driver if you want suspend/resume. (That
said, it would be better if you could run the Sun audiohd driver instead.)
iprb does not *yet* support suspend, but that is about to change. (I
have test binaries I can send you for it, if you want to run unsupported
binaries. The RTI should be filed later this week.)
-- Garrett
Hern?n Saltiel wrote:
> Hello!
> I own an HP dv5000 laptop with a Cetrino Duo processor, 1 GB RAM, S-ata disk,
> NVidia Geforce GO 7400, etc.
> I configured the suspend feature as mentioned on some place here:
> - Modified /etc/power.conf to include "S3-support enable".
> - Ran pmconfig.
> - Restarted hal.
> After this, when I clicked on System-Shutdown-Suspend, the machine did
> everything but suspend.
> The wireless led indicator started to blink, the fans started to spin like
> hell, etc.
> The last solution was to poweroff the machine with the power button.
> On my /var/adm/messages I saw this:
>
> Nov 23 00:12:30 invid gnome-session[784]: [ID 702911 daemon.warning] WARNING:
> Could not connect to ConsoleKit: Could not get owner of name
> 'org.freedesktop.ConsoleKit': no such name
> Nov 23 00:12:37 invid genunix: [ID 535284 kern.notice] System is being
> suspended
> Nov 23 00:12:38 invid nvidia: [ID 702911 kern.notice] NOTICE: NVRM:
> RmPowerManagement: 4
> Nov 23 00:12:39 invid hdaudio: [ID 443441 kern.warning] WARNING: bad detach
> cmd 1
> Nov 23 00:12:39 invid acpica: [ID 530733 kern.notice] NOTICE:
> acpica_ddi_setwake: could not evaluate _PRW
> Nov 23 00:12:39 invid last message repeated 1 time
> Nov 23 00:12:39 invid genunix: [ID 122848 kern.warning] WARNING: Unable to
> suspend device pci103c,30a5 at 8.
> Nov 23 00:12:39 invid genunix: [ID 537702 kern.warning] WARNING: Device is
> busy or does not support suspend/resume.
> Nov 23 00:12:40 invid acpica: [ID 530733 kern.notice] NOTICE:
> acpica_ddi_setwake: could not evaluate _PRW
> Nov 23 00:12:40 invid usba: [ID 723738 kern.info] /pci at 0,0/pci103c,30a5 at
> 1d,7 (ehci0): Unable to take control from BIOS. Failure is ignored.
> Nov 23 00:12:42 invid iprb: [ID 547387 kern.warning] WARNING: iprb: device
> never responded!
> Nov 23 00:12:42 invid mac: [ID 486395 kern.info] NOTICE: iprb0 link down
> Nov 23 00:12:42 invid acpica: [ID 530733 kern.notice] NOTICE:
> acpica_ddi_setwake: could not evaluate _PRW
> Nov 23 00:12:42 invid hdaudio: [ID 451073 kern.warning] WARNING: bad attach
> cmd 1
> Nov 23 00:12:42 invid nvidia: [ID 702911 kern.notice] NOTICE: NVRM:
> RmPowerManagement: 5
> Nov 23 00:12:43 invid /sbin/dhcpagent[205]: [ID 947604 daemon.warning]
> checkaddr: expected local address 192.9.200.225 on iprb0, have 0.0.0.0
> Nov 23 00:12:43 invid in.routed[411]: [ID 464608 daemon.error] route
> 0.0.0.0/24 --> 0.0.0.0 nexthop is not directly connected
>
> My hostname is "invid", as you can see :-)
> Does anybody know what this stands for?
> Thanks a lot, and best regards.
>
> HeCSa.
>
