Hi Ruben, thanks for the valuable inputs. I'm trying to reproduce the issue now, having in mind all your tests. Will come back to you as soon as i'm able to shed any light on that.
Cheers, Paolo On Thu, Jun 14, 2007 at 01:08:07PM +0200, Ruben Laban wrote: > I cheered too early. After letting my script run for a longer period, it > became clear that I still suffer from constantly increasing values for a lot > of ip addresses. It seems that only the first 150 or so ip address are > getting reset properly, though don't pin me down on that. I read in the > Changelog that batch requests can hold upto 4096 requests, so that shouldn't > be a problem either I'd say. > Running pmacct -r in a loop for each single ip address had crossed my mind. > Though when I did some (interactive) testing with a single ip address, I once > again had the problem that the counter didn't get reset always. I tested this > with running a ping to this host (1 ping / sec) and running pmacct -r every > second as well. Most of the time the counter would be 0, yet sometimes the > counter would increase each second and magically drop down to 1 again at a > certain point. > > Still confused, and still on a quest to find the cause of all this. > > Regards, > Ruben Laban _______________________________________________ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
