Thanks, finally, I found it was a init.d script problem. When launching
from bash using -D, everything works fine.
I tweek the init.d script and everything are fine.
Great tool ;) Already loving it :D
Le 2016-03-24 00:06, Paolo Lucente a écrit :
Hi Fabien,
Is it possible a stale nfacctd is still running and bound to the port?
Or that on the system there is also a pmacct from packages? If neither
of these would be the case then i'd be puzzled myself and would be
happy
to have a look at the issue myself.
Cheers,
Paolo
On Tue, Mar 22, 2016 at 11:30:01AM +0100, Fabien VINCENT wrote:
Dear List,
I've just installed pmacct from source to run an nfacctd collector
for netflow/bgp. When trying to execute a script to push data from
pmacct to graphite, which run pmacct -se, I've the following error.
[11:21 root@pmacct ~] > pmacct -se
ERROR: IP address sizes mismatch. daemon: 20 client: 8
ERROR: It's very likely that an IPv6-enabled package has been mixed
with a IPv4-only one.
ERROR: Please fix the issue before trying again.
How can I fix it ? I've disabled all IPv6 on the machine, and can't
find documentation about the reason of this error.
Thanks for your help ;)
_______________________________________________
pmacct-discussion mailing list
http://www.pmacct.net/#mailinglists
_______________________________________________
pmacct-discussion mailing list
http://www.pmacct.net/#mailinglists
_______________________________________________
pmacct-discussion mailing list
http://www.pmacct.net/#mailinglists
