This is astonishing, because the modem has been working earlier (on
earlier OpenBSDs and earlier main boards).
But now it doesn't work any longer, whatever I try, it stops at DTE-DCE
flow control scheme [default]. I can still press enter or anything, but
faxaddmodem waits indefinitely (for what ?).
I also tried xonxoff and rtscts; with the same result. I also tried
class 1; same result. (I use class 2 here, because this modem always
worked well with class 2)
I searched the archives and google; and found one similar occurrence:
http://www.bsdforums.org/forums/showthread.php?t=34612
Is this a BSD-problem, eventually ?
This is about what it does:
....
Are these ok [yes]?
Now we are going to probe the tty port to figure out the type
of modem that is attached. This takes a few seconds, so be patient.
Note that if you do not have the modem cabled to the port, or the
modem is turned off, this may hang (just go and cable up the modem
or turn it on, or whatever).
Probing for best speed to talk to modem: 38400 OK.
This modem looks to have support for Class 1 and 2.
How should it be configured [1]? 2
Hmm, this looks like a Class 2 modem.
Modem manufacturer is "PHILIPS".
Modem model is "ROCKWELL 144DPI".
DTE-DCE flow control scheme [default]?
whatever I type
here, it is echoed.
But no DTE-DCE takes place.
Any hint welcome,
Uwe
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class, 256KB
L2 cache) 1.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: AMD Powernow: TS TTP TM STC
real mem = 469278720 (458280K)
avail mem = 421019648 (411152K)
using 4278 buffers containing 23568384 bytes (23016K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(05) BIOS, date 06/05/06, BIOS32 rev. 0 @ 0xfb300
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd324
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd200/256 (14 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xde00 0xd0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
"NVIDIA C51 Host" rev 0xa2 at pci0 dev 0 function 0 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 1 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 2 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 3 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 4 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 5 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 6 not configured
"NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 7 not configured
ppb0 at pci0 dev 2 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci2 at ppb1 bus 2
ppb2 at pci0 dev 4 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci3 at ppb2 bus 3
vga1 at pci0 dev 5 function 0 "NVIDIA GeForce 6100" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"NVIDIA MCP51 Host" rev 0xa2 at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0 "NVIDIA MCP51 ISA" rev 0xa3
"NVIDIA MCP51 SMBus" rev 0xa3 at pci0 dev 10 function 1 not configured
"NVIDIA MCP51 Memory" rev 0xa3 at pci0 dev 10 function 2 not configured
ohci0 at pci0 dev 11 function 0 "NVIDIA MCP51 USB" rev 0xa3: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 11 function 1 "NVIDIA MCP51 USB" rev 0xa3: irq 5
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
pciide0 at pci0 dev 13 function 0 "NVIDIA MCP51 IDE" rev 0xa1: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRRW GWA-4166B, 2.04> SCSI0
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ppb3 at pci0 dev 16 function 0 "NVIDIA MCP51 PCI-PCI" rev 0xa2
pci4 at ppb3 bus 4
eap0 at pci4 dev 7 function 0 "Ensoniq CT5880" rev 0x02: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
"Texas Instruments TSB43AB23 FireWire" rev 0x00 at pci4 dev 14 function
0 not configured
nfe0 at pci0 dev 20 function 0 "NVIDIA MCP51 LAN" rev 0xa3: irq 11,
address 00:16:e6:4f:31:1e
ukphy0 at nfe0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x005043, model 0x0021
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e76d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <ST325082, 4A, 0 0> SCSI0 0/direct fixed
sd0: 238474MB, 238474 cyl, 64 head, 32 sec, 512 bytes/sec, 488395055 sec
total
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
