On Tuesday 09 January 2007 2:27 pm, J.C. Roberts wrote:
> Building and installing the lang/jdk/1.3, lang/jdk/1.3-linux and
> lang/jdk/1.4 ports of 4.0-STABLE worked perfectly. Though I can't test
> the 1G issue you mentioned, I did hit an issue building the lang/kaffe
> dependency while trying to build the devel/jdk/1.5 port.
>
> I've managed to repeat the error on the second attempt when just trying
> to build /lang/kaffe
>
> The 'easy' part works just fine ;-)
> # make
> completes successuflly
>
> The problem is when building the package.
> # make package
> this dies a miserable death...
>
> You might want to note that the error below is sligtly different than
> the one posted to misc@ on the first time through. Somehow junk is
> getting appended to one of the path names. "Documeowwve" below and
> "javaoosowxuownonowmkwssxozuwo" in the error previously posted error
> sent to [EMAIL PROTECTED]
Yea that sure is unusual. Kinda looks like memory or disk
problems at first glance especially since it changes and
has random values.
There also is a possibility this is due to pthreads. I changed
how pthreads deals with pipes in -current to work-around a random
OOo build failure see mostly on mp systems. Did you by chance
pipe stdout and/or stderr somewhere (i.e. tee, portslogger)?
>
>
> Making install in lib
> gmake[3]: Entering directory
> `/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/build-i386/libraries/javalib/external/classpath/lib'
> true
> top_builddir=..
> top_srcdir=/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/kaffe-1.1.7/libraries/javalib/external/classpath
> /bin/sh ./gen-classlist.sh
> standard
> Adding java source files from srcdir
> '/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/kaffe-1.1.7/libraries/javalib/external/classpath'.
> Adding java source files from VM
> directory
> /usr/ports/lang/kaffe/w-kaffe-1.1.7p2/kaffe-1.1.7/libraries/javalib/vmspecific
> Adding generated files in builddir '..'.
> gmake[3]: *** No rule to make target
> `/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/kaffe-1.1.7/libraries/javalib/external/classpath/javax/swing/event/Documeowwve~',
>
> needed by `compile-classes'. Stop.
> gmake[3]: Leaving directory
> `/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/build-i386/libraries/javalib/external/classpath/lib'
> gmake[2]: *** [install-recursive] Error 1
> gmake[2]: Leaving directory
> `/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/build-i386/libraries/javalib/external/classpath'
> gmake[1]: *** [install-recursive] Error 1
> gmake[1]: Leaving directory
> `/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/build-i386/libraries/javalib'
> gmake: *** [install-recursive] Error 1
> *** Error code 2
>
> Stop in /usr/ports/lang/kaffe (line 1995
> of /usr/ports/infrastructure/mk/bsd.port.mk).
> $
>
>
> The error smells weird so I'll try updating -stable again just to make
> sure I don't have something corrupted. Since the last time I updated
> ports two weeks ago, I had to fsck this box due to a power loss during
> a bad storm, so the problem might be on my end.
>
>
>
> And of course, my dmesg.
>
>
> OpenBSD 4.0-stable (GENERIC.MP) #2: Fri Dec 29 07:50:04 PST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(TM) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
> real mem = 1072754688 (1047612K)
> avail mem = 970498048 (947752K)
> using 4256 buffers containing 53739520 bytes (52480K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 11/01/04, BIOS32 rev. 0 @
> 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (114 entries)
> bios0: Dell Computer Corporation Precision WorkStation 530 MT
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba00/224 (12 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801BA LPC" rev
> 0x00)
> pcibios0: PCI bus #4 is the last bus
> bios0: ROM list: 0xc0000/0x8800 0xc8800/0x2800
> mainbus0: Intel MP Specification (Version 1.4) (DELL WS 530 )
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Xeon(TM) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type PCI
> mainbus0: bus 4 is type PCI
> mainbus0: bus 5 is type ISA
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82860 Host" rev 0x04: rng active,
> 7Kb/sec
> ppb0 at pci0 dev 1 function 0 "Intel 82850/82860 AGP" rev 0x04
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "Matrox MGA G400/G450 AGP" rev 0x82
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb1 at pci0 dev 2 function 0 "Intel 82860 PCI-PCI" rev 0x04
> pci2 at ppb1 bus 2
> ppb2 at pci2 dev 31 function 0 "Intel 82806AA" rev 0x03
> pci3 at ppb2 bus 3
> "Intel 82806AA APIC" rev 0x01 at pci3 dev 0 function 0 not configured
> ami0 at pci3 dev 13 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
> int 21 (irq 10)
> ami0: LSI 523, 32b, FW 713R, BIOS vG121, 64MB RAM
> ami0: 1 channels, 0 FC loops, 1 logical drives
> scsibus0 at ami0: 40 targets
> sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
> fixed
> sd0: 457749MB, 457749 cyl, 64 head, 32 sec, 512 bytes/sec, 937469952 sec
> total
> scsibus1 at ami0: 16 targets
> ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x04
> pci4 at ppb3 bus 4
> xl0 at pci4 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x78: apic 2
> int 23 (irq 9)xl0: reset didn't complete
> , address 00:06:5b:87:ad:bd
> exphy0 at xl0 phy 24: 3Com internal media interface
> xl0: reset didn't complete
> "TI TSB12LV26 FireWire" rev 0x00 at pci4 dev 12 function 0 not
> configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x04
> pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x04: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <Maxtor 7Y250P0>
> wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus2 at atapiscsi0: 2 targets
> cd0 at scsibus2 targ 0 lun 0: <LITE-ON, LTR-48246S, SUS5> SCSI0 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x04: apic 2 int
> 19 (irq 11)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x04: apic 2
> int 17 (irq 9)
> iic0 at ichiic0
> admtemp0 at iic0 addr 0x18: adm1023
> uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x04: apic 2 int
> 23 (irq 9)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x04: apic 2
> int 17 (irq 9), ICH2 AC97
> ac97: codec id 0x41445360 (Analog Devices AD1885)
> ac97: codec features headphone, Analog Devices Phat Stereo
> audio0 at auich0
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask 0 netmask 0 ttymask 0
> ioapic0: pin 17 shares different IPL interrupts (40..90), degraded
> performance
> ioapic0: pin 23 shares different IPL interrupts (40..50), degraded
> performance
> pctr: user-level cycle counter enabled
> apm0: disconnected
> dkcsum: sd0 matches BIOS drive 0x80
> dkcsum: wd0 matches BIOS drive 0x81
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> auich0: measured ac97 link rate at 55935 Hz
>
>
