I doubt you want the software renderer you want ref_gl.so (+set vid_ref gl). And the Yamagi version (http://www.yamagi.org/quake2/) is a better option. A port of it is attached.
On Sun, Aug 25, 2013 at 12:09:11AM -0400, Chess Griffin wrote:
> Hello,
>
> I have installed the quake2 package on my 5.4-current snapshot system
> and also installed the official pak files from my Quake2 CD. However,
> when I start the game I get the following output:
>
> $ quake2
> QuakeIIForge 0.3
> Added packfile /usr/local/share/quake2/baseq2/pak0.pak (3307 files)
> Added packfile /usr/local/share/quake2/baseq2/pak1.pak (279 files)
> Added packfile /usr/local/share/quake2/baseq2/pak2.pak (2 files)
> using /home/chess/.quake2/baseq2/ for writing
> execing default.cfg
> execing config.cfg
> Console initialized.
> ------- Loading ref_softx.so -------
> LoadLibrary("ref_softx.so")
> setting mode 3: 640 480
> 1488k surface cache
> ref_soft version: SOFT 0.01
> ------------------------------------
>
> ------- sound initialization -------
> quake2:/usr/local/lib/quake2/snd_sndio.so: quake2 : WARNING: symbol(si)
> size mismatch, relink your program loading sndio sound output driver, ok
> Segmentation fault (core dumped)
>
>
> Sound works fine in openarena, openttd, and audacious. The system is a
> Lenovo Thinkpad X230. Dmesg is also attached.
>
> Thank you in advance for any guidance on getting the game to work.
>
> --
> Chess Griffin
> OpenBSD 5.4-current (RAMDISK_CD) #37: Mon Aug 19 17:07:28 MDT 2013
> [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 8237572096 (7855MB)
> avail mem = 8013377536 (7642MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (69 entries)
> bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013
> bios0: LENOVO 2306CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
> UEFI UEFI MSDM SSDT SSDT DMAR UEFI DBG2
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.98 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 99MHz
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 4 (EXP3)
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> 3c:97:0e:76:b1:19
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 2
> "Ricoh 5U822 SD/MMC" rev 0x07 at pci1 dev 0 function 0 not configured
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 3
> vendor "Intel", unknown product 0x0891 (class network subclass miscellaneous,
> rev 0xc4) at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 4
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel QM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0> SCSI3 0/direct
> fixed naa.5002538550100280
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
> isa0 at mainbus0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
> uhub3 at uhub2 port 2 "vendor 0x05e3 USB2.0 Hub" rev 2.00/32.98 addr 3
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev0: iclass 3/1
> uhid at uhidev0 not configured
> uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev1: iclass 3/0, 17 report ids
> uhid at uhidev1 reportid 3 not configured
> uhid at uhidev1 reportid 16 not configured
> uhid at uhidev1 reportid 17 not configured
> uhub4 at uhub3 port 4 "vendor 0x05e3 USB2.0 Hub" rev 2.00/32.98 addr 5
> "FUJITSU ScanSnap S300" rev 2.00/1.00 addr 6 at uhub4 port 1 not configured
> uhidev2 at uhub4 port 4 configuration 1 interface 0 "vendor 0x04d9 USB
> Keyboard" rev 1.10/3.90 addr 7
> uhidev2: iclass 3/1
> ukbd0 at uhidev2
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev3 at uhub4 port 4 configuration 1 interface 1 "vendor 0x04d9 USB
> Keyboard" rev 1.10/3.90 addr 7
> uhidev3: iclass 3/1, 2 report ids
> uhid at uhidev3 reportid 1 not configured
> uhid at uhidev3 reportid 2 not configured
> "Auth Biometric Coprocessor" rev 1.10/0.01 addr 8 at uhub2 port 3 not
> configured
> "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 9 at uhub2 port 4 not configured
> "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.18 addr 10 at
> uhub2 port 6 not configured
> uhub5 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> syncing disks... done
> rebooting...
> OpenBSD 5.4-current (RAMDISK_CD) #37: Mon Aug 19 17:07:28 MDT 2013
> [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 8237572096 (7855MB)
> avail mem = 8013377536 (7642MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (69 entries)
> bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013
> bios0: LENOVO 2306CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
> UEFI UEFI MSDM SSDT SSDT DMAR UEFI DBG2
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.88 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 99MHz
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpi0: WARNING EC not initialized
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 4 (EXP3)
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> 3c:97:0e:76:b1:19
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 2
> "Ricoh 5U822 SD/MMC" rev 0x07 at pci1 dev 0 function 0 not configured
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 3
> vendor "Intel", unknown product 0x0891 (class network subclass miscellaneous,
> rev 0xc4) at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 4
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel QM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0> SCSI3 0/direct
> fixed naa.5002538550100280
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
> isa0 at mainbus0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
> uhub3 at uhub2 port 2 "vendor 0x05e3 USB2.0 Hub" rev 2.00/32.98 addr 3
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev0: iclass 3/1
> uhid at uhidev0 not configured
> uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev1: iclass 3/0, 17 report ids
> uhid at uhidev1 reportid 3 not configured
> uhid at uhidev1 reportid 16 not configured
> uhid at uhidev1 reportid 17 not configured
> uhub4 at uhub3 port 4 "vendor 0x05e3 USB2.0 Hub" rev 2.00/32.98 addr 5
> "FUJITSU ScanSnap S300" rev 2.00/1.00 addr 6 at uhub4 port 1 not configured
> uhidev2 at uhub4 port 4 configuration 1 interface 0 "vendor 0x04d9 USB
> Keyboard" rev 1.10/3.90 addr 7
> uhidev2: iclass 3/1
> ukbd0 at uhidev2
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev3 at uhub4 port 4 configuration 1 interface 1 "vendor 0x04d9 USB
> Keyboard" rev 1.10/3.90 addr 7
> uhidev3: iclass 3/1, 2 report ids
> uhid at uhidev3 reportid 1 not configured
> uhid at uhidev3 reportid 2 not configured
> "Auth Biometric Coprocessor" rev 1.10/0.01 addr 8 at uhub2 port 3 not
> configured
> "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 9 at uhub2 port 4 not configured
> "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.18 addr 10 at
> uhub2 port 6 not configured
> uhub5 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
> umass0 at uhub5 port 1 configuration 1 interface 0 "Seagate FreeAgent Go" rev
> 2.00/1.48 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <Seagate, FreeAgent Go, 0148> SCSI2 0/direct
> fixed
> sd1: 476940MB, 512 bytes/sector, 976773167 sectors
> uhidev4 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/57.01 addr 4
> uhidev4: iclass 3/1
> uhid at uhidev4 not configured
> uhidev5 at uhub5 port 2 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/57.01 addr 4
> uhidev5: iclass 3/0, 17 report ids
> uhid at uhidev5 reportid 3 not configured
> uhid at uhidev5 reportid 16 not configured
> uhid at uhidev5 reportid 17 not configured
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> syncing disks... done
> rebooting...
> OpenBSD 5.4-current (GENERIC.MP) #44: Mon Aug 19 17:02:07 MDT 2013
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8237572096 (7855MB)
> avail mem = 8010186752 (7639MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (69 entries)
> bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013
> bios0: LENOVO 2306CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
> UEFI UEFI MSDM SSDT SSDT DMAR SSDT UEFI DBG2
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
> EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.96 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> cpu0: apic clock running at 99MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.43 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.43 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.43 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 4 (EXP3)
> acpicpu0 at acpi0: C2, C1, PSS
> acpicpu1 at acpi0: C2, C1, PSS
> acpicpu2 at acpi0: C2, C1, PSS
> acpicpu3 at acpi0: C2, C1, PSS
> acpipwrres0 at acpi0: PUBS
> acpitz0 at acpi0: critical temperature is 103 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "45N1025" serial 4690 type LION oem "LGC"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2901, 2900, 2800, 2700, 2500,
> 2400, 2300, 2200, 2000, 1900, 1800, 1700, 1600, 1400, 1300, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1366x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> 3c:97:0e:76:b1:19
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 2
> sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
> sdmmc0 at sdhc0
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 3
> vendor "Intel", unknown product 0x0891 (class network subclass miscellaneous,
> rev 0xc4) at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 4
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0> SCSI3 0/direct
> fixed naa.5002538550100280
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbdprobe: reset response 0x0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> uhub3 at uhub2 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 3
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev0: iclass 3/1
> ums0 at uhidev0: 16 buttons, Z dir
> wsmouse2 at ums0 mux 0
> uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev1: iclass 3/0, 17 report ids
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
> uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
> uhub4 at uhub3 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 5
> ugen0 at uhub4 port 1 "FUJITSU ScanSnap S300" rev 2.00/1.00 addr 6
> uhidev2 at uhub4 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev
> 1.10/3.90 addr 7
> uhidev2: iclass 3/1
> ukbd0 at uhidev2: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev3 at uhub4 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev
> 1.10/3.90 addr 7
> uhidev3: iclass 3/1, 2 report ids
> uhid3 at uhidev3 reportid 1: input=6, output=0, feature=0
> uhid4 at uhidev3 reportid 2: input=1, output=0, feature=0
> ugen1 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 8
> ugen2 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 9
> uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
> Ltd. Integrated Camera" rev 2.00/5.18 addr 10
> video0 at uvideo0
> uhub5 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> umass0 at uhub5 port 1 configuration 1 interface 0 "Seagate FreeAgent Go" rev
> 2.00/1.48 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <Seagate, FreeAgent Go, 0148> SCSI2 0/direct
> fixed
> sd1: 476940MB, 512 bytes/sector, 976773167 sectors
> uhidev4 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/57.01 addr 4
> uhidev4: iclass 3/1
> ums1 at uhidev4: 16 buttons, Z dir
> wsmouse3 at ums1 mux 0
> uhidev5 at uhub5 port 2 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/57.01 addr 4
> uhidev5: iclass 3/0, 17 report ids
> uhid5 at uhidev5 reportid 3: input=4, output=0, feature=0
> uhid6 at uhidev5 reportid 16: input=6, output=6, feature=0
> uhid7 at uhidev5 reportid 17: input=19, output=19, feature=0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd1a (2a5aeae0022ca2f2.a) swap on sd1b dump on sd1b
> syncing disks... done
> rebooting..
> OpenBSD 5.4-current (GENERIC.MP) #44: Mon Aug 19 17:02:07 MDT 2013
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8237572096 (7855MB)
> avail mem = 8010186752 (7639MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (69 entries)
> bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013
> bios0: LENOVO 2306CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
> UEFI UEFI MSDM SSDT SSDT DMAR SSDT UEFI DBG2
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
> EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.90 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> cpu0: apic clock running at 99MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.44 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.44 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.44 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 4 (EXP3)
> acpicpu0 at acpi0: C2, C1, PSS
> acpicpu1 at acpi0: C2, C1, PSS
> acpicpu2 at acpi0: C2, C1, PSS
> acpicpu3 at acpi0: C2, C1, PSS
> acpipwrres0 at acpi0: PUBS
> acpitz0 at acpi0: critical temperature is 103 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "45N1025" serial 4690 type LION oem "LGC"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2901, 2900, 2800, 2700, 2500,
> 2400, 2300, 2200, 2000, 1900, 1800, 1700, 1600, 1400, 1300, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1366x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> 3c:97:0e:76:b1:19
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 2
> sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
> sdmmc0 at sdhc0
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 3
> vendor "Intel", unknown product 0x0891 (class network subclass miscellaneous,
> rev 0xc4) at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 4
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0> SCSI3 0/direct
> fixed naa.5002538550100280
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbdprobe: reset response 0x0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> uhub3 at uhub2 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 3
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev0: iclass 3/1
> ums0 at uhidev0: 16 buttons, Z dir
> wsmouse2 at ums0 mux 0
> uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev1: iclass 3/0, 17 report ids
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
> uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
> uhub4 at uhub3 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 5
> ugen0 at uhub4 port 1 "FUJITSU ScanSnap S300" rev 2.00/1.00 addr 6
> uhidev2 at uhub4 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev
> 1.10/3.90 addr 7
> uhidev2: iclass 3/1
> ukbd0 at uhidev2: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev3 at uhub4 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev
> 1.10/3.90 addr 7
> uhidev3: iclass 3/1, 2 report ids
> uhid3 at uhidev3 reportid 1: input=6, output=0, feature=0
> uhid4 at uhidev3 reportid 2: input=1, output=0, feature=0
> ugen1 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 8
> ugen2 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 9
> uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
> Ltd. Integrated Camera" rev 2.00/5.18 addr 10
> video0 at uvideo0
> uhub5 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> umass0 at uhub5 port 1 configuration 1 interface 0 "Seagate FreeAgent Go" rev
> 2.00/1.48 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <Seagate, FreeAgent Go, 0148> SCSI2 0/direct
> fixed
> sd1: 476940MB, 512 bytes/sector, 976773167 sectors
> uhidev4 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/57.01 addr 4
> uhidev4: iclass 3/1
> ums1 at uhidev4: 16 buttons, Z dir
> wsmouse3 at ums1 mux 0
> uhidev5 at uhub5 port 2 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/57.01 addr 4
> uhidev5: iclass 3/0, 17 report ids
> uhid5 at uhidev5 reportid 3: input=4, output=0, feature=0
> uhid6 at uhidev5 reportid 16: input=6, output=6, feature=0
> uhid7 at uhidev5 reportid 17: input=19, output=19, feature=0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd1a (2a5aeae0022ca2f2.a) swap on sd1b dump on sd1b
> ehci_idone: ex=0xffff800000bad800 is done!
> umass1 at uhub3 port 2 configuration 1 interface 0 "TSSTcorp USB Mass Storage
> Device" rev 2.00/6.10 addr 11
> umass1: using ATAPI over Bulk-Only
> scsibus4 at umass1: 2 targets, initiator 0
> cd0 at scsibus4 targ 1 lun 0: <TSSTcorp, CDDVDW SE-S084B, TS00> ATAPI 5/cdrom
> removable serial.13fd0841M00000040a00
> ehci_idone: ex=0xffff800000d08600 is done!
> ehci_idone: ex=0xffff800000d08600 is done!
> ehci_idone: ex=0xffff800000d08600 is done!
> ehci_idone: ex=0xffff800000d08600 is done!
> ehci_idone: ex=0xffff800000d08600 is done!
> ehci_idone: ex=0xffff800000d08600 is done!
> syncing disks... done
> rebooting..
> OpenBSD 5.4-current (GENERIC.MP) #44: Mon Aug 19 17:02:07 MDT 2013
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8237572096 (7855MB)
> avail mem = 8010186752 (7639MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (69 entries)
> bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013
> bios0: LENOVO 2306CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
> UEFI UEFI MSDM SSDT SSDT DMAR SSDT UEFI DBG2
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
> EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.92 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> cpu0: apic clock running at 99MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.43 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.43 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.43 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 4 (EXP3)
> acpicpu0 at acpi0: C2, C1, PSS
> acpicpu1 at acpi0: C2, C1, PSS
> acpicpu2 at acpi0: C2, C1, PSS
> acpicpu3 at acpi0: C2, C1, PSS
> acpipwrres0 at acpi0: PUBS
> acpitz0 at acpi0: critical temperature is 103 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "45N1025" serial 4690 type LION oem "LGC"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2901, 2900, 2800, 2700, 2500,
> 2400, 2300, 2200, 2000, 1900, 1800, 1700, 1600, 1400, 1300, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1366x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> 3c:97:0e:76:b1:19
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 2
> sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
> sdmmc0 at sdhc0
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 3
> vendor "Intel", unknown product 0x0891 (class network subclass miscellaneous,
> rev 0xc4) at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 4
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0> SCSI3 0/direct
> fixed naa.5002538550100280
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbdprobe: reset response 0x0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> uhub3 at uhub2 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 3
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev0: iclass 3/1
> ums0 at uhidev0: 16 buttons, Z dir
> wsmouse2 at ums0 mux 0
> uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/5.00 addr 4
> uhidev1: iclass 3/0, 17 report ids
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
> uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
> umass0 at uhub3 port 2 configuration 1 interface 0 "TSSTcorp USB Mass Storage
> Device" rev 2.00/6.10 addr 5
> umass0: using ATAPI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> cd0 at scsibus1 targ 1 lun 0: <TSSTcorp, CDDVDW SE-S084B, TS00> ATAPI 5/cdrom
> removable serial.13fd0841M00000040a00
> uhub4 at uhub3 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 6
> ugen0 at uhub4 port 1 "FUJITSU ScanSnap S300" rev 2.00/1.00 addr 7
> uhidev2 at uhub4 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev
> 1.10/3.90 addr 8
> uhidev2: iclass 3/1
> ukbd0 at uhidev2: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev3 at uhub4 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev
> 1.10/3.90 addr 8
> uhidev3: iclass 3/1, 2 report ids
> uhid3 at uhidev3 reportid 1: input=6, output=0, feature=0
> uhid4 at uhidev3 reportid 2: input=1, output=0, feature=0
> ugen1 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 9
> ugen2 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 10
> uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
> Ltd. Integrated Camera" rev 2.00/5.18 addr 11
> video0 at uvideo0
> uhub5 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> umass1 at uhub5 port 1 configuration 1 interface 0 "Seagate FreeAgent Go" rev
> 2.00/1.48 addr 3
> umass1: using SCSI over Bulk-Only
> scsibus2 at umass1: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Seagate, FreeAgent Go, 0148> SCSI2 0/direct
> fixed
> sd1: 476940MB, 512 bytes/sector, 976773167 sectors
> uhidev4 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/57.01 addr 4
> uhidev4: iclass 3/1
> ums1 at uhidev4: 16 buttons, Z dir
> wsmouse3 at ums1 mux 0
> uhidev5 at uhub5 port 2 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/57.01 addr 4
> uhidev5: iclass 3/0, 17 report ids
> uhid5 at uhidev5 reportid 3: input=4, output=0, feature=0
> uhid6 at uhidev5 reportid 16: input=6, output=6, feature=0
> uhid7 at uhidev5 reportid 17: input=19, output=19, feature=0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd1a (2a5aeae0022ca2f2.a) swap on sd1b dump on sd1b
> cd0 detached
> scsibus1 detached
> umass0 detached
yquake2.tgz
Description: application/tar-gz
