I'm currently using 2.4.3.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cam Roberts Sent: Tuesday, September 30, 2008 7:03 PM To: [email protected] Subject: Re: [Pound Mailing List] load is not balanced when session handling Hi Alfonso, I've tried swapping the location before and you're right, it makes no difference. Can you let me know which version of pound you're running? Thanks, --Cameron On Tue, Sep 30, 2008 at 5:30 PM, Alfonso Espitia < [EMAIL PROTECTED]> wrote: > My config looks like your original one, except that the session stuff > was after the "backend" directive, instead of before. I doubt that > will make a difference, but maybe someone else knows. > > --Alfonso > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cam > Roberts > Sent: Tuesday, September 30, 2008 5:15 PM > To: [email protected] > Subject: Re: [Pound Mailing List] load is not balanced when session > handling > > Thanks for the response, The site is actually live so the traffic is > coming in from all over the place. > > I was thinking along the same lines and actually ignored the lopsided > effect during my testing for exactly this reason, I assumed since all > the load was coming from a handful of test servers I wasn't seeing > realistic production behaviour. However the problem continued after > we went "live" with it. > > Thanks, > --Cam Roberts > > On Tue, Sep 30, 2008 at 4:55 PM, Alfonso Espitia < > [EMAIL PROTECTED]> wrote: > > > Are you trying this from a different location? > > > > If you try to hit it from the same location, it will direct you to > > the > > > same server (because you ARE coming from the same IP). > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of > > Cam Roberts > > Sent: Tuesday, September 30, 2008 4:06 PM > > To: [email protected] > > Subject: [Pound Mailing List] load is not balanced when session > > handling > > > > Hi, > > I've configured pound with two BackEnds and Session Type IP, TTL > 300. > > > > However all the load goes to one of the back end servers, I never > > see an apache connection on the other until the "primary" goes down. > > I'm not using Emergency, and if I comment out the Session block the > > load is balanced evenly between the two servers. > > > > > > Relevant portion of my pound.cfg: > > > > Service > > BackEnd > > Address 10.0.0.2 > > Port 80 > > End > > Session > > Type IP > > TTL 300 > > End > > End > > Service > > BackEnd > > Address 10.0.0.4 > > Port 80 > > End > > Session > > Type IP > > TTL 300 > > End > > End > > > > > > Originally I had: > > > > Service > > Session > > Type IP > > TTL 300 > > End > > BackEnd > > Address 10.0.0.2 > > Port 80 > > End > > BackEnd > > Address 10.0.0.4 > > Port 80 > > End > > End > > > > The behaviour seems to be identical with both of the above > > configurations, it doesn't do any load balancing when Session is > > declared. > > > > From my understanding of the manpage load should still be balanced > > when session handling is used, individual users will be bound to a > > single server but it should alternate with each new connection. Am > > I misunderstanding session handling? > > > > -- > > Thanks, > > --Cameron Roberts > > > > > > -- > > To unsubscribe send an email with subject unsubscribe to > [EMAIL PROTECTED] > > Please contact [EMAIL PROTECTED] for questions. > > > > -- > > This message has been scanned for viruses and dangerous content by > > SecureMail, and is believed to be clean. > > > > > > > > -- > > To unsubscribe send an email with subject unsubscribe to > [EMAIL PROTECTED] > > Please contact [EMAIL PROTECTED] for questions. > > > > > -- > To unsubscribe send an email with subject unsubscribe to [EMAIL PROTECTED] > Please contact [EMAIL PROTECTED] for questions. > > -- > This message has been scanned for viruses and dangerous content by > SecureMail, and is believed to be clean. > > > > -- > To unsubscribe send an email with subject unsubscribe to [EMAIL PROTECTED] > Please contact [EMAIL PROTECTED] for questions. > -- To unsubscribe send an email with subject unsubscribe to [EMAIL PROTECTED] Please contact [EMAIL PROTECTED] for questions. -- This message has been scanned for viruses and dangerous content by SecureMail, and is believed to be clean. -- To unsubscribe send an email with subject unsubscribe to [EMAIL PROTECTED] Please contact [EMAIL PROTECTED] for questions.
