It definitely sounds to me like you need to set a Threads parameter. The default is only 128. This was a major change from Pound 2.5 which had a dynamic threading module.
With 2.6, you have to guess how many threads you might need, and then Pound will always run with that many threads. You can only tell you've hit the limit when connections start to bog down. See some discussion on that here: http://www.apsis.ch/pound/pound_list/archive/2012/2012-03/1331922215000 I would definitely crank the Threads number way up. We run it at 1536. Is that too many? I have no way to know, and I'm not going to turn it down and wait for something to go wrong to find out. On 11/14/2014 07:53 AM, Jeffrey J Ramsay wrote: > There are no options set for threads. I'm including the generated > configuration as is: > > SSO-PROD-S_pound.cfg > ------------------------------------- > > ###################################################################### > ##GLOBAL OPTIONS > User "root" > Group "root" > ## allow PUT and DELETE also (by default only GET, POST and HEAD)?: > #ExtendedHTTP 0 > ## Logging: (goes to syslog by default) > ## 0 no logging > ## 1 normal > ## 2 extended > ## 3 Apache-style (common log format) > #LogFacility local5 > LogLevel 0 > ## check backend: > Timeout 90 > Alive 30 > Client 45 > Control "/tmp/SSO-PROD-S_pound.socket" > > > #HTTP(S) LISTENERS > ListenHTTPS > Err414 "/usr/local/zenloadbalancer/config/SSO-PROD-S_Err414.html" > Err500 "/usr/local/zenloadbalancer/config/SSO-PROD-S_Err500.html" > Err501 "/usr/local/zenloadbalancer/config/SSO-PROD-S_Err501.html" > Err503 "/usr/local/zenloadbalancer/config/SSO-PROD-S_Err503.html" > Address 128.226.6.164 > Port 8443 > xHTTP 0 > RewriteLocation 0 > > #Ciphers "TLSv1+SSLv3+HIGH:-MEDIUM:-LOW*:-ADH*" > Cert "/usr/local/zenloadbalancer/config/stunnel.pem" > #ZWACL-INI > > Service "virtual-host" > #HeadRequire "Host: " > #Url "" > #Redirect "" > Session > Type IP > TTL 7200 > # #ID "sessionname"" > End > #BackEnd > > BackEnd > Address 28.22.9.14 > Port 8080 > End > BackEnd > Address 28.22.9.16 > Port 8080 > End > #End > End > #ZWACL-END > > > #Service "SSO-PROD-S" > #HeadRequire "Host: " > #Url "" > #Redirect "" > #Session > #Type nothing > #TTL 120 > #ID "sessionname" > #End > #BackEnd > > #End > #End > > > End > > -Jeff > > > On Fri, Nov 14, 2014 at 8:29 AM, qutic development > <[email protected] <mailto:[email protected]>> wrote: > > On 14.11.2014, at 13:50, Jeffrey J Ramsay <[email protected] > <mailto:[email protected]>> wrote: > > > So, can this be related to Pound? or is it likely another issue > completely. Any help on this would be most welcomed. > > How many Threads do you have configured in pound.cfg? > > > -- > To unsubscribe send an email with subject unsubscribe to > [email protected] <mailto:[email protected]>. > Please contact [email protected] <mailto:[email protected]> for questions. > > > > > -- > Jeffrey Ramsay > Assistant Director > Enterprise Software Infrastructure > and Technical Planning > Binghamton University > http://www.binghamton.edu -- To unsubscribe send an email with subject unsubscribe to [email protected]. Please contact [email protected] for questions.
