I will increase the Thread count. Not knowing this earlier has really
caused us some major problems.
-Jeff
On 11/14/2014 1:42 PM, Xan Charbonnet wrote:
It definitely sounds to me like you need to set a Threads parameter.
The default is only 128. This was a major change from Pound 2.5 which
had a dynamic threading module.
With 2.6, you have to guess how many threads you might need, and then
Pound will always run with that many threads. You can only tell you've
hit the limit when connections start to bog down.
See some discussion on that here:
http://www.apsis.ch/pound/pound_list/archive/2012/2012-03/1331922215000
I would definitely crank the Threads number way up. We run it at 1536.
Is that too many? I have no way to know, and I'm not going to turn it
down and wait for something to go wrong to find out.
On 11/14/2014 07:53 AM, Jeffrey J Ramsay wrote:
There are no options set for threads. I'm including the generated
configuration as is:
SSO-PROD-S_pound.cfg
-------------------------------------
######################################################################
##GLOBAL OPTIONS
User "root"
Group "root"
## allow PUT and DELETE also (by default only GET, POST and HEAD)?:
#ExtendedHTTP 0
## Logging: (goes to syslog by default)
## 0 no logging
## 1 normal
## 2 extended
## 3 Apache-style (common log format)
#LogFacility local5
LogLevel 0
## check backend:
Timeout 90
Alive 30
Client 45
Control "/tmp/SSO-PROD-S_pound.socket"
#HTTP(S) LISTENERS
ListenHTTPS
Err414 "/usr/local/zenloadbalancer/config/SSO-PROD-S_Err414.html"
Err500 "/usr/local/zenloadbalancer/config/SSO-PROD-S_Err500.html"
Err501 "/usr/local/zenloadbalancer/config/SSO-PROD-S_Err501.html"
Err503 "/usr/local/zenloadbalancer/config/SSO-PROD-S_Err503.html"
Address 128.226.6.164
Port 8443
xHTTP 0
RewriteLocation 0
#Ciphers "TLSv1+SSLv3+HIGH:-MEDIUM:-LOW*:-ADH*"
Cert "/usr/local/zenloadbalancer/config/stunnel.pem"
#ZWACL-INI
Service "virtual-host"
#HeadRequire "Host: "
#Url ""
#Redirect ""
Session
Type IP
TTL 7200
# #ID "sessionname""
End
#BackEnd
BackEnd
Address 28.22.9.14
Port 8080
End
BackEnd
Address 28.22.9.16
Port 8080
End
#End
End
#ZWACL-END
#Service "SSO-PROD-S"
#HeadRequire "Host: "
#Url ""
#Redirect ""
#Session
#Type nothing
#TTL 120
#ID "sessionname"
#End
#BackEnd
#End
#End
End
-Jeff
On Fri, Nov 14, 2014 at 8:29 AM, qutic development
<[email protected] <mailto:[email protected]>> wrote:
On 14.11.2014, at 13:50, Jeffrey J Ramsay <[email protected]
<mailto:[email protected]>> wrote:
> So, can this be related to Pound? or is it likely another issue
completely. Any help on this would be most welcomed.
How many Threads do you have configured in pound.cfg?
--
To unsubscribe send an email with subject unsubscribe to
[email protected] <mailto:[email protected]>.
Please contact [email protected] <mailto:[email protected]> for questions.
--
Jeffrey Ramsay
Assistant Director
Enterprise Software Infrastructure
and Technical Planning
Binghamton University
http://www.binghamton.edu
--
To unsubscribe send an email with subject unsubscribe to [email protected].
Please contact [email protected] for questions.
--
Jeffrey Ramsay
Assistant Director
Enterprise Software Infrastructure
and Technical Planning
Binghamton University
http://www.binghamton.edu
--
To unsubscribe send an email with subject unsubscribe to [email protected].
Please contact [email protected] for questions.
