> I *think* I've solved the problem, but it took running the installer > twice before powerpro picked up the pcf file in its new location > without creating a new one. I ran the installer with the pcf already > in its new location, and I pointed powerpro to that folder. When I > started powerpro my existing bar appeared. So far so good. I then > immediately shut down powerpro and restarted it, and it once again > picked up the pcf in its new location.
Not sure why you have to run it twice. You are correct that if there is no pproconf.pcf in the chosen folder, PowerPro will copy default.pcf there. So either putting your desired pproconf.pcf in the folder first, or copying it over pproconf.pcf later, should work. To set up a folder after install, just create the folder, copy the correct files in (see help index "command line of PowerPro.exe"), and change any shortcuts you use to access PowerPro to point to the new folder. Take a look at the properties of shortcuts powerpro has created to see what you have to do. Or look at command line in help index. In short, the command line should be "c:\path\to\powerpro.exe" c:\path with space\to\pproconf.pcf Note the pcf path does not have enclosing quotes.
