> eth0? it seems like your network card driver, or maybe your wireless card
> driver is waking up the cpu. Try shutting down the device or unplugging the
> network cord.
>
> If this doesn't help you can try inspecting /proc/interrupts and figure out
> which module is causing more wake ups. Then try removing one by one.
Thanks for your hint, I didn't think of /proc/interrupts.
CPU0
0: 265 IO-APIC-edge timer
1: 3945 IO-APIC-edge i8042
3: 3 IO-APIC-edge
4: 1 IO-APIC-edge
7: 0 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 50502 IO-APIC-edge i8042
14: 14585 IO-APIC-edge pata_amd
15: 13173 IO-APIC-edge pata_amd
18: 0 IO-APIC-fasteoi sata_promise
19: 0 IO-APIC-fasteoi rad...@pci:0000:03:00.0
20: 3 IO-APIC-fasteoi ohci_hcd:usb3, ohci1394
21: 183 IO-APIC-fasteoi ohci_hcd:usb2, NVidia nForce2
22: 96896 IO-APIC-fasteoi ehci_hcd:usb1, eth0
NMI: 0 Non-maskable interrupts
LOC: 199292 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
_______________________________________________
Power mailing list
[email protected]
http://www.bughost.org/mailman/listinfo/power
