Hi ! I found similar behaviour, it shows that are kernel wakeups, I don't have my laptop here but if I can remember are timer wake ups, is there a way to solve it?
2010/11/2 Vitus Jensen <[email protected]> > Hej! > > Since some kernel versions I notice very high wakeup rates during idle ... > while the reasons for the wakeup stay at reasonable low numbers. In the > 'powertop -d' output below it's 27463 wakeups/sec but the highest number > for any reason is 48. How do I find out what causes the wakeups? They > are actually there because the machine is using ~2W more than usual. > > My usual kernel is 2.6.27, it's shows ~100 wakeups (X11, Wifi+powersave) > > On this 2.6.36 powertop most of the time reports 1.000-200.000 wakeups > during idle. It may get to 100 (X11, Wifi) or ~50 (no X11, no Wifi), > seldomly. > > Best regards, > Vitus > > > PowerTOP 1.13 (C) 2007 - 2010 Intel Corporation > > Sammle Daten für 15 Sekunden > > > Cn Verweildauer > C0 (Prozessor läuft) (16,1%) > C0 0,0ms ( 0,0%) > C1 halt 6,1ms ( 0,5%) > C2 0,0ms (46,3%) > C3 12,4ms (37,2%) > P-States (Frequenzen) > 1,74 GHz 18,3% > 1333 MHz 0,0% > 1066 MHz 0,0% > 800 MHz 81,7% > Aufwachen pro Sekunde : 27463,0 Intervall: 15,0s > Keine ACPI Stromverbrauch-Schätzung verfügbar > Häufigste Ursachen für das Aufwachen: > 59,0% ( 48,0) [ohci_hcd:usb1, ath, ohci_hcd:usb2, ehci_hcd:usb3] > <interrupt> > 21,9% ( 17,8) [extra timer interrupt] > 10,7% ( 8,7) epiphany > 2,5% ( 2,1) emacs > 1,2% ( 1,0) mail-notificati > 0,7% ( 0,5) watchdog/0 > 0,6% ( 0,5) hald-addon-stor > 0,4% ( 0,3) gnome-panel > 0,4% ( 0,3) gpg-agent > 0,3% ( 0,3) [ide0] <interrupt> > 0,3% ( 0,3) nautilus > 0,2% ( 0,2) [kernel scheduler] Load balancing tick > 0,2% ( 0,2) wpa_cli > 0,2% ( 0,2) init > 0,2% ( 0,2) [kernel core] hrtimer_start (tick_sched_timer) > 0,2% ( 0,1) gnome-power-man > 0,2% ( 0,1) alpine > 0,2% ( 0,1) wpa_supplicant > 0,1% ( 0,1) gconfd-2 > 0,1% ( 0,1) pidgin > 0,1% ( 0,1) [kernel core] __mod_timer (sync_supers_timer_fn) > 0,1% ( 0,1) [kernel core] __mod_timer (cfq_idle_slice_timer) > 0,1% ( 0,1) sync_supers > 0,1% ( 0,1) ssh-agent > > Deaktivieren Sie mit folgendem Befehl die "Wake-On-Lan" Funktion: > ethtool -s eth0 wol d > "Wake-On-Lan" hält die Physikalische Netzwerkverbindung aufrecht. > > Vorschlag: Aktivieren Sie mit folgendem Befehl die WLAN > Stromsparfunktionen: > iwconfig wlan0 power timeout 500ms > Dadurch verringert sich die WLAN-Geschwindigkeit etwas, spart aber Strom. > > Vorschlag: Aktivieren Sie die Option CONFIG_INOTIFY Ihres Kernels. > Mit dieser Option können Programme auf Veränderungen im Dateisystem > warten, anstatt diese selber ständig abzufragen. > > aktuelle "USB suspend" Statistiken > Name des aktiven Gerätes > 0,0% USB Gerät usb3 : EHCI Host Controller (Linux 2.6.36 > ehci_hcd) > 0,0% USB Gerät usb2 : OHCI Host Controller (Linux 2.6.36 > ohci_hcd) > 0,0% USB Gerät usb1 : OHCI Host Controller (Linux 2.6.36 > ohci_hcd) > > Runtime Device Power Management statistics > Name des aktiven Gerätes > 100,0% 04:02.0 Ethernet controller: Atheros Communications Inc. Atheros > AR5001X+ Wireless Network Adapter > 0,0% 04:00.0 CardBus bridge: Texas Instruments PCI1510 PC card > Cardbus Controller > 100,0% 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme > BCM5751F Fast Ethernet PCI Express > 100,0% 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 > AC'97 Audio Controller > 100,0% 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller > 0,0% 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 > Host Controller > 0,0% 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB > Host Controller > 0,0% 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB > Host Controller > > Devices without runtime PM > 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon > Xpress 200M] > 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge > 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge > 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller > 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge > 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge > 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge > 00:00.0 Host bridge: ATI Technologies Inc Device 5a31 > > Recent audio activity statistics > Name des aktiven Gerätes > > Recent SATA AHCI link activity statistics > Active Partial Slumber Device name > > -- > Vitus Jensen, Hannover, Germany, Earth, Universe (current) > > _______________________________________________ > Power mailing list > [email protected] > http://www.bughost.org/mailman/listinfo/power >
_______________________________________________ Power mailing list [email protected] http://www.bughost.org/mailman/listinfo/power
