Hej!

Since some kernel versions I notice very high wakeup rates during idle ... 
while the reasons for the wakeup stay at reasonable low numbers.  In the 
'powertop -d' output below it's 27463 wakeups/sec but the highest number 
for any reason is 48.  How do I find out what causes the wakeups?  They 
are actually there because the machine is using ~2W more than usual.

My usual kernel is 2.6.27, it's shows ~100 wakeups (X11, Wifi+powersave)

On this 2.6.36 powertop most of the time reports 1.000-200.000 wakeups 
during idle.  It may get to 100 (X11, Wifi) or ~50 (no X11, no Wifi), 
seldomly.

Best regards,
    Vitus


PowerTOP 1.13   (C) 2007 - 2010 Intel Corporation

Sammle Daten für 15 Sekunden


Cn                 Verweildauer
C0 (Prozessor läuft)    (16,1%)
C0                0,0ms ( 0,0%)
C1 halt           6,1ms ( 0,5%)
C2                0,0ms (46,3%)
C3               12,4ms (37,2%)
P-States (Frequenzen)
   1,74 GHz    18,3%
   1333 MHz     0,0%
   1066 MHz     0,0%
    800 MHz    81,7%
Aufwachen pro Sekunde : 27463,0 Intervall: 15,0s
Keine ACPI Stromverbrauch-Schätzung verfügbar
Häufigste Ursachen für das Aufwachen:
   59,0% ( 48,0)   [ohci_hcd:usb1, ath, ohci_hcd:usb2, ehci_hcd:usb3] 
<interrupt>
   21,9% ( 17,8)   [extra timer interrupt]
   10,7% (  8,7)   epiphany
    2,5% (  2,1)   emacs
    1,2% (  1,0)   mail-notificati
    0,7% (  0,5)   watchdog/0
    0,6% (  0,5)   hald-addon-stor
    0,4% (  0,3)   gnome-panel
    0,4% (  0,3)   gpg-agent
    0,3% (  0,3)   [ide0] <interrupt>
    0,3% (  0,3)   nautilus
    0,2% (  0,2)   [kernel scheduler] Load balancing tick
    0,2% (  0,2)   wpa_cli
    0,2% (  0,2)   init
    0,2% (  0,2)   [kernel core] hrtimer_start (tick_sched_timer)
    0,2% (  0,1)   gnome-power-man
    0,2% (  0,1)   alpine
    0,2% (  0,1)   wpa_supplicant
    0,1% (  0,1)   gconfd-2
    0,1% (  0,1)   pidgin
    0,1% (  0,1)   [kernel core] __mod_timer (sync_supers_timer_fn)
    0,1% (  0,1)   [kernel core] __mod_timer (cfq_idle_slice_timer)
    0,1% (  0,1)   sync_supers
    0,1% (  0,1)   ssh-agent

Deaktivieren Sie mit folgendem Befehl die "Wake-On-Lan" Funktion:
   ethtool -s eth0 wol d
"Wake-On-Lan" hält die Physikalische Netzwerkverbindung aufrecht.

Vorschlag: Aktivieren Sie mit folgendem Befehl die WLAN Stromsparfunktionen:
   iwconfig wlan0 power timeout 500ms
Dadurch verringert sich die WLAN-Geschwindigkeit etwas, spart aber Strom.

Vorschlag: Aktivieren Sie die Option CONFIG_INOTIFY Ihres Kernels.
Mit dieser Option können Programme auf Veränderungen im Dateisystem
warten, anstatt diese selber ständig abzufragen.

aktuelle "USB suspend" Statistiken
Name des aktiven Gerätes
   0,0% USB Gerät usb3 : EHCI Host Controller (Linux 2.6.36 ehci_hcd)
   0,0% USB Gerät usb2 : OHCI Host Controller (Linux 2.6.36 ohci_hcd)
   0,0% USB Gerät usb1 : OHCI Host Controller (Linux 2.6.36 ohci_hcd)

Runtime Device Power Management statistics
Name des aktiven Gerätes
100,0%  04:02.0 Ethernet controller: Atheros Communications Inc. Atheros 
AR5001X+ Wireless Network Adapter
   0,0% 04:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus 
Controller
100,0%  02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751F 
Fast Ethernet PCI Express 
100,0%  00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 
AC'97 Audio Controller 
100,0%  00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller
   0,0% 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host 
Controller
   0,0% 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host 
Controller
   0,0% 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host 
Controller

Devices without runtime PM
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 
200M]
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:00.0 Host bridge: ATI Technologies Inc Device 5a31

Recent audio activity statistics
Name des aktiven Gerätes

Recent SATA AHCI link activity statistics
Active  Partial Slumber Device name

-- 
Vitus Jensen, Hannover, Germany, Earth, Universe (current)

_______________________________________________
Power mailing list
[email protected]
http://www.bughost.org/mailman/listinfo/power

Reply via email to