>
> And also verify if there is a space in the beginning of the line or not
> (on the MSI: etc lines)
I can not understand it . What do you mean ? thanks a lot !
# cat /proc/interrupts
CPU0 CPU1
0: 20666616 13431012 IO-APIC-edge timer
1: 4092 1821 IO-APIC-edge i8042
8: 60 51 IO-APIC-edge rtc0
9: 587804 368978 IO-APIC-fasteoi acpi
12: 1235991 421069 IO-APIC-edge i8042
14: 375948 370430 IO-APIC-edge ata_piix
15: 187844 114120 IO-APIC-edge ata_piix
16: 0 0 IO-APIC-fasteoi yenta, uhci_hcd:usb6
17: 0 1 IO-APIC-fasteoi uhci_hcd:usb7
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb8, mmc0
19: 55667 23885 IO-APIC-fasteoi ehci_hcd:usb2
20: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
21: 46 16 IO-APIC-fasteoi uhci_hcd:usb4
22: 0 0 IO-APIC-fasteoi uhci_hcd:usb5
23: 32 10 IO-APIC-fasteoi ehci_hcd:usb1
40: 0 0 PCI-MSI-edge pciehp
41: 0 0 PCI-MSI-edge pciehp
42: 0 0 PCI-MSI-edge pciehp
43: 0 0 PCI-MSI-edge pciehp
44: 16 780 PCI-MSI-edge eth0
45: 1756495 347941 PCI-MSI-edge iwlagn
46: 442 24262 PCI-MSI-edge hda_intel
47: 650042 820204 PCI-MSI-edge i...@pci:0000:00:02.0
NMI: 0 0 Non-maskable interrupts
LOC: 10590098 13906844 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 829223 918638 Rescheduling interrupts
CAL: 387 228 Function call interrupts
TLB: 66092 77903 TLB shootdowns
TRM: 0 9 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 83 82 Machine check polls
ERR: 5
MIS: 0
2010/12/4 Ian Kumlien <[email protected]>
> On Sat, 2010-12-04 at 21:32 +0800, waterloo wrote:
> > my [kernel scheduler] Load balancing tick is very high about 1000.
> >
> > I have installed E17 and gnome 2.30.2 in gentoo .
> > Now I am in gnome when I run the powertop .
> > My kernel is gentoo-sources 2.6.35-r13.
> > Before when my kernel is gentoo-sources 2.6.34-r12 , the number is
> > also high .
> > How to decrease the number ?
>
> Could you send output of /proc/interrupts
>
> And also verify if there is a space in the beginning of the line or not
> (on the MSI: etc lines)
>
> > Thanks a lot !
> >
> > Cn Avg residency P-states (frequencies)
> > C0 (cpu running) (13.5%) Turbo Mode 1.8%
> > polling 0.5ms ( 0.1%) 2.81 Ghz 0.1%
> > C1 mwait 0.0ms ( 0.0%) 2.14 Ghz 0.2%
> > C2 mwait 0.2ms ( 7.0%) 1.60 Ghz 0.2%
> > C4 mwait 0.6ms (79.4%) 800 Mhz 97.6%
> >
> > Wakeups-from-idle per second : 1679.3 interval: 10.0s
> > no ACPI power usage estimate available
> >
> > Top causes for wakeups:
> > 45.7% (1061.8) [kernel scheduler] Load balancing tick
> > 24.7% (574.5) [extra timer interrupt]
> > 10.9% (253.3) PS/2 keyboard/mouse/touchpad interrupt
> > 4.2% ( 98.1) pulseaudio
> > 2.2% ( 50.1) [kernel core] __mod_timer
> > (<ffffffffa00b7df0>)
> > 2.1% ( 48.9) firefox
> > 1.6% ( 37.9) [acpi] <interrupt>
> > 1.6% ( 36.3) [i915] <interrupt>
> > 1.3% ( 29.6) [iwlagn] <interrupt>
> > 1.2% ( 27.7) [Rescheduling interrupts] <kernel IPI>
> > 1.2% ( 27.3) [kernel core] hrtimer_start
> > (tick_sched_timer)
> > 0.5% ( 11.5) [ata_piix] <interrupt>
> > 0.4% ( 9.7) gnome-hdaps-app
> > 0.3% ( 7.9) X
> > 0.3% ( 6.8) stardict
> >
> > Suggestion: Enable USB autosuspend for non-input devices by
> > pressing the U key
> >
> > _______________________________________________
> > Power mailing list
> > [email protected]
> > http://www.bughost.org/mailman/listinfo/power
>
>
>
_______________________________________________
Power mailing list
[email protected]
http://www.bughost.org/mailman/listinfo/power
