>This message written: Friday, 7 June 2002 13:13:44 PDT > >Obtained a 1400cs133 the other day. It has a couple of cosmetic flaws, >but seems to be otherwise a good machine. > >It is missing one of the rubber "corner feet" (the right one), and has a >couple of "stress cracks" in the top near the hinges. > >It has a floppy drive in the expansion bay that is inoperable. It looks >to me like the connector on the drive that should engage the connector in >the chassis is missing. I just see the edge of the circuit board with a >small row of solder pads. Can someone describe the "proper" appearance of >the connector on the floppy module?
If you need to replace the floppy mechanism, you can use the floppy from a PB 500 series. Mad DOg -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
