on 29/07/02 09:27, Nick Harman at [EMAIL PROTECTED] wrote: > Hi > > I have a pb1400cs/166 running a fresh and clean 9.1. The machine has a > Dayna Communicard Plus pcmcia card fitted with an adaptor that allows > ethernet and modem. Its running the most recent Dayna s/ware (altho > dayna went bust a while back) > > The ethernet side runs fine, but when i try to use the modem (ARA) I get > the 'port in use, check for other applications etc' message. > > Naturally i have tried turning off appletalk. I have no fax software at > all. After the clean install I went straight to the ara (after > installing dayna software) and did not even attempt to use the ethernet > side.
Nick A couple of quick thoughts, check that the modem CP points to the PC card and not the modem/printer port. Also do you use anything such as a PDA which has sync software which may be looking for you to plug a device in ? Best wishes Malcolm Cornelius - The Powerbook Fanatic www.pbfanatic.co.uk -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
