Hello All,
I'm new to the list and I'm trying to bring my wife's 5300 back to a
usable life. There are two major considerations (and one minor):
1. the AC adaptor socket on the circuit board is loose. I have
repaired this twice before; disassembling the 5300 and resoldering.
But the solder joints don't hold: the plug wiggles and the joints
break. Any suggestions?
2. The floppy drive is broken. This happened when I pried out a
defective DiskTools floppy (!). Thus I am looking for either the
floppy mechanism to install into the floppy module, or a complete
module.
3. this is the "minor" consideration: where is a good place to get torx
drivers to work on the 5300?
Feel free to contact me off list.
Thnx in advance for any help offered.
m.
Kali Music Repair Service
murali levine
santa fe, nm 87505
505.473.1236
--
PowerBooks is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
