Well last night after sending that email, I toiled on the 3400 til the early
hours of the morning.  By 2:00 AM I had pretty much pinpointed about where
on the motherboard was sensitive to touch from the bottom (as in when this
part of the motherboard was pushed slightly down, the whole system shut
off).  It was right around the audio in jack.  So then another hour passed
by as I fought with this thing.  Finally out of pure anger I ripped the
audio in jack off the motherboard.  Then I crammed three quarters between
the bottom of the case and the heat shield to prop up the motherboard so it
would under no circumstances move downward.

It seems to have worked.

This is the first email I've sent from the 3400 in well over a month.  The
machine has been continuously on for a long time with no random shutting
off.

I'm so happy.

Now I'm installing Final Cut Pro 1.0 on it.  Where can I get a cheap
firewire card for this thing?

I couldn�t find any of those newer FireWire 2 go cards.  But I found a whole
bunch of other cards, some in the $20 range from stores.  Can I get these?

Every card I see says it requires a 266mhz G3 or faster processor and MacOS
8.6 blah blah.  But I highly doubt that drivers require any type of
processor.  After all didn�t final cut pro require a G3?  It runs great on
the 3400.


--
PowerBooks is sponsored by <http://lowendmac.com/> and...

  Small Dog Electronics    http://www.smalldog.com   | Enter To Win A |
  -- Canon PowerShot Digital Cameras start at $299   |  Free iBook!   |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

PowerBooks list info:   <http://lowendmac.com/lists/powerbooks.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to