nathan <[EMAIL PROTECTED]> asked:
>So being that I do not own a copy of os8 ( OS9, but 16megs
>won't install) So I jumped over to apple's website and d/l'ed 7.5.3. with
>the 7.5.5updater. The problems is, I don't know how I can split it to
>individual floppies to install it on the 1400.. I do not currently have a
>burner in the 8600 to burn the image.. So does anyone know how to split the
>image into floppies? Or how to make a "boot" floppy to install?

Ric suggested:
>>DL the 7.5 Network Access boot floppy.

to which Drew replied:
>That one won't boot a 1400 (or even a 5300).  The system version is 
>too old.  However, Dan K (is that right?) posted a good guide on how 
>to make a custom NA floppy.  Search the archives at mail-archive.com.
Yep, t'was me. Heck if I remember the exact details though. Sigh, however 
I suppose I'm obliged to go back and recap, just as soon as I can dig out 
my recollections . . . :-)

so here's what I wrote oh-so-long-ago
(same applies to most any nubus Mac incl PB1400):

I made a network access disk for PBs 5300 by installing the Network 
Software package onto a 7.6 System tools floppy. To ensure I would have 
enough room, I used the minimal Finder and Chooser from the Network 
Access Disk. BTW, this same procedure works to build a NAD for PBs 
2400/3400 as well, you just need to ensure the 2400/3400 enabler is in 
place as those 'Books won't boot from an original 7.6 without it.

Starting with a fresh 7.6 Disk Tools (DT) floppy image, drag that image 
file onto Disk Copy's (DC) icon while holding down the command key. DC 
will launch to the save-as dialog and prompt for name and what sort of 
image type, choose read/write and check the 'Mount Image' box, then 
create the disk image. Now mount the image files Network Access Disk 
(NAD) and Network Software Installer (NSI) by simply double-clicking them 
in the Finder.

Go to the desktop and open the now-mounted read/write DT floppy. Trash 
Drive Setup and Disk FirstAid, along with the Finder and Chooser from the 
System Folder. Open the mounted NAD and copy the Finder and Chooser into 
their appropriate places in the Disk Tool's System Folder. Open the 
mounted NSI volume, launch the installer and point it to the DT's System 
Folder. Now to make the floppy disk itself . . .

The easiest way to create the actual floppy disk is to drag the modified 
.img file onto DC's icon while holding down the option key, that tells DC 
you want to make a floppy with the disk image rather than simply mount 
the disk image. Alternatively, in DC go to -> Utility: Make a Floppy, and 
point DC to the mounted DT volume as the source, then make the floppy 
disk.

disk image sources:
1) Disk Tools floppy disk image links:
<http://home.earthlink.net/~gamba2/bootdisks.html>
2) Network Access Disk:
<http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/E
nglish-North_American/Macintosh/Utilities/Network_Access_Disk_7.5.sea.bin>
3) Network SW installer:
<http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/E
nglish-North_American/Macintosh/Networking-Communications/Network_Software_
Installer/ZM-NSI_1.5.1.sea.bin>

Disk Copy 6.3.3:
<http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/E
nglish-North_American/Macintosh/Utilities/Disk_Copy/Disk_Copy_6.3.3.smi.bin
>

I'd like to be able to post a copy of this somewhere as an already-built 
disk, but I'd rather not run afoul of Apple's ever-vigilant legal-eagles. 
In any case, it's easy enough for most anyone to do.

I have built-up 7.x disks that can use a PCcard ethernet card, and for 
the built-in enet in PBs 3400. Most of those driver resources are pretty 
small, so if the basic enet capability is there it usually fits.  I know 
I also tried this with OS 8.x disks but cannot recall if I had any luck. 
Using 8.1 should allow one to install an OS to an HFS+ boot volume. IIRC 
the 8.5 floppy didn't have enough room.

Any questions?

Dan K


.................................
http://macdan.n3.net/
carracho://dankephoto.dhs.org:9700
hotline://dankephoto.dhs.org:9500
.................................


-- 
PowerBooks is sponsored by <http://lowendmac.com/> and...

  Small Dog Electronics    http://www.smalldog.com   | Enter To Win A |
  -- Canon PowerShot Digital Cameras start at $299   |  Free iBook!   |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

PowerBooks list info:   <http://lowendmac.com/lists/powerbooks.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to