Ok, i've done all these steps, but the thing doesn't work....
I've also disassembled a duo 2300c and installed the ide-cf adapter to
see if it works, but it seems that i've found further problems: it
doesn't boot from a floppy!!! I've tried 8.0 install disk 2, but crashes
while loading the finder, showing "error 41"... then reboot: the floppy
has been someway corrupted!
Any ideas?
The cf card is pc-formatted, so maybe this can be a problem with duo
210, but i'm quite surprised of the 2300c booting problems!
VICTORIA.DUGGAN ha scritto:
Hi It is the pins on the ide side of the scsi to ide adapter there
should be 4 pins on there own like on a hdd set the first 2 (ie
outside 2) with a jumper thats what i did.
vicki
On Feb 3, 2006, at 1:53 PM, tr0x wrote:
ok, i've set 4=on and 5=on, the cf is set to master.... but how do i
set master on scsi card?
Are the pins near scsi connector suitable for this?
Thanks,
Andrea.
--
PowerBooks is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[email protected]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com
