Hmmm, that's interesting. As I said previously, I, too, have a PCP210, but I have never heard of a PCI riser card, and I have had that machine apart more time than I'd care to remember. I know there's a cache card above and to the rear of the CPU daughter card that some accelerator cards ask you to remove (because it might conflict with the G3's onboard cache), but PCI riser...that's a new one on me. Please 'splain.
herb Greg Merritt wrote: > Does your model of PowerComputing machine have a pci riser card? > > If so, then the removal/reinstall of the processor card and > other motherboard components can disturb the seating of the pci riser > card, and then the machine will appear totally dead. > > Yank out your PCI riser card, then totally reseat it. > Actually, I'd install the riser after the processor and other bits > were in. Hold down the CUDA switch for good measure for about half a > minute, then hook up cables and boot it up. > > This is a (somewhat) well-known problem w/ powercomputing > machines w/ PCI riser cards. > > Good luck, > -Greg -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
