Robert wrote: >I have 3 1 GB Quantum Fireball HD's mounted in an external tower and a SCSI >cable coming out of the tower to the SCCSI port on the back of my Power >Center 150. If I attach the SCSI cable the P-c won't recognize any drives >including the internal one. This doesn't matter if the external tower is >powered on or not. I thought it might be a SCSI ID thing but even on the >second bus each device has a unique number. FWB HD Toolkit doesn't see >them, and again if I attach the cable and rescan it doesn't even see it's >drive. > >Any suggestions?
Check the cabling. Some cables have no key on one edge. If the scsi cable (interior) of the HD in the external case is reversed, it will cause this condition. (Do not ask how I know..=) Cheers...Michael -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
