On 3/13/03 10:47 AM, David Chiu at [EMAIL PROTECTED] wrote: > I have a PowerCurve (still on the original 601-120 processor running w/OS9) > that does not restart correctly; selecting Restart from Finder or hitting > Reset button will hang the system after the chime. The unit otherwise boots > correctly from power cycle. Is there something painfully obvious that I am > missing? TIA for any comments. >
I have a Power Tower Pro, Original 604E with all sorts of cards and drives and memory on it. Same problem. Cold boot, works like a champ. 3 finger..and it hangs. I have tried, swap out memory, I have tried various boot drives on both internal and external bus, I have tried full PRAM reset (pull battery over nite). I have tried various operating systems from 8.6- 9.1 ....and it still exhibits this. I figure its a problem basic to something in Power motherboards. BTW I have 2 PTPs and I have noted this on BOTH of them again in several various configurations..... -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
