---------------------------------------------------- Message-ID: <[EMAIL PROTECTED]> From: "Jim and Vicki" <[EMAIL PROTECTED]> Subject: Re: Newbie Questions . . . Date: Fri, 27 Jun 2003 17:59:35 -0400
You misspelled license... ;-) Jim Snyder ----- Original Message ----- From: "Jim" <[EMAIL PROTECTED]> > ROTFLMAO!!!!!! Good job! > > >I have no direct response to this latest spate of ingratiated prose. However, I will take this as lisense to criticise the paragraph itself, in the hopes of improving the general level of literacy on the net. > > ------------------------------ Message-ID: <[EMAIL PROTECTED]> From: "Jriverrun" <[EMAIL PROTECTED]> Subject: Re: Newbie Questions . . . Date: Fri, 27 Jun 2003 17:03:00 -0500 you guys are a hoot! Janet > [Original Message] > From: Jim and Vicki <[EMAIL PROTECTED]> > To: Power Computing List <[EMAIL PROTECTED]> > Date: 6/27/2003 3:59:35 PM > Subject: Re: Newbie Questions . . . > > You misspelled license... > > ;-) > > Jim Snyder > > ----- Original Message ----- > From: "Jim" <[EMAIL PROTECTED]> I have had 2 Power Tower Pros that have experienced this one and I never have figured an answer. Current Power Tower Pro is a 225Mz with 130mb memory, (ot is NOT a 001 motherboard) with: 2 2gb drives on the 1st SCSI BUS, 2 1gbs on the 2nd BUS, and a stack of 4gb drives on a AHA-2940 PowerDomain card. Running Mac OS 9.1 The problem: The Ethernet doesn't work. I have plugged in a CAT5 to the RJ45, I have tried 3 different AAUIs on that port, I have swapped hubs, tried a AAUI<>10b2 trnciever and coax.. and even tried a cross-over to another Mac that works on ethernet..... On the hub, the light ont hat port fires up fine. but, go to chooser and it is a blank; no other Macs listed. No printers are selectable either. I tried a ping ont he PTPs TCP port from another box and that does nto respond either In all respects this PTP works fine except...it doesn't see ethernet. What I find weird is; I used to have a different Power Tower Pro and it TOO had this same symptom... If only I could find a NIC that works ona Mac I would try that, but, so far all I have are a dozen PC only NICs. unless someone out there knows a place for a driver for a Tulip, Intel Etherexpress, 3COM, Linksys 8029, or other such that works in Mac Land...<grumble> Has anyone else ever experienced a dead Etherent connection when by all rights it should work? btw, Localtalk (I was curious so I tried it) DOES work on this beast.. -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
