Hi. I have a PowerTower Pro 225 with a NewerTech MaxPowr G3 upgrade card. My internal drive died when I tried to upgrade to system 9.2 and I had to open it up and disconnect the boot drive in order to start from a CD. Then I installed the system on the other installed drive and I now want to make that my boot drive.
Does anyone know how to do this. I didn't get the manual and I am not sure if I need to physically move the drives, just swap the cables, or mess with jumpers. Any info would be very appreciated. /Chris Burke Hmm, normally you'd go into the control panel to "Start-up Disk" and assign the new drive as start-up drive. Not sure if that still works when you start from a CD, but it should. There is another trick that involves swapping SCSI numbers, but never having tried it, I'm not sure if that is such a good idea. Hans -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
