Dell - Internal Use - Confidential
that was only for the c6200 chassis/nodes. "bmc allinfo" should show it if it
is available. (i think that's the command; it's been a while). I definitely
remember writing that code, but if you're interested in an older chassis
(C6145, C6100, etc) the info might not have been available. I think this was a
later add-I was pretty excited to be able to expose it.
Michael Stumpf
Storage, Embedded Management
Dell | PowerEdge Portfolio Sys Engr
From: poweredgec-tools-bounces On Behalf Of Nigel Williams
Sent: Thursday, May 12, 2016 11:01 PM
To: Stumpf, Michael; poweredgec-tools
Subject: Re: [Poweredgec-tools] query PSU size?
I found this, but the field is empty?
[root@c0 pec]# ./bmc scbmc_get_chassis_power_capping
ec : 256
raw : Unable to send RAW command
(channel=0x0 netfn=0x30 lun=0x0 cmd=0x18 rsp=0xc1): Invalid command
completion code : 193
Enabled :
Chassis Power Limit : watt
Chassis Power Limit Action :
Node Power Limit Exception :
Chassis Emergency Limit Action :
chs emergency limit action text : unknown
Node Emergency Limit Action (encoded) :
[root@c0 pec]#
From: michael_stu...@dell.com<mailto:michael_stu...@dell.com>
[mailto:michael_stu...@dell.com]
Sent: Friday, 13 May 2016 1:48 PM
To: Nigel Williams
<nigel.willi...@utas.edu.au<mailto:nigel.willi...@utas.edu.au>>;
poweredgec-to...@lists.us.dell.com<mailto:poweredgec-to...@lists.us.dell.com>
Subject: RE: query PSU size?
Dell - Internal Use - Confidential
bmc tool has that, i think.
Michael Stumpf
Storage, Embedded Management
Dell | PowerEdge Portfolio Sys Engr
From: poweredgec-tools-bounces On Behalf Of Nigel Williams
Sent: Thursday, May 12, 2016 9:25 PM
To: poweredgec-tools
Subject: [Poweredgec-tools] query PSU size?
Is there a way to query the PSU size (1100W or 1400W) from the command line
(ipmi or one of the PEC tools)?
Thanks.
University of Tasmania Electronic Communications Policy (December, 2014).
This email is confidential, and is for the intended recipient only. Access,
disclosure, copying, distribution, or reliance on any of it by anyone outside
the intended recipient organisation is prohibited and may be a criminal
offence. Please delete if obtained in error and email confirmation to the
sender. The views expressed in this email are not necessarily the views of the
University of Tasmania, unless clearly intended otherwise.
_______________________________________________
Poweredgec-tools mailing list
Poweredgec-tools@dell.com
https://lists.us.dell.com/mailman/listinfo/poweredgec-tools
