Mike - I don’t have a lot of experience with the 6220 - but I have some similar Dell hardware (1950/2950/c1100/c6100), that I expect behaves in a similar fashion.
It looks like PSU1 lost input power - the cord was unplugged, or the circuit tripped. The configuration error is because the configuration of the PSUs does not match the current running value. The redundancy error happens when one of the power two supplies has one into an error state. -- Otto Monnig IT/DevOps > On Aug 22, 2017, at 2:19 PM, Mike Ngo <m...@smartbuy.com> wrote: > > By the way fyi, I've just signed up to your subscription so I guess I am > officially a member now? And my original email will be posted on "a > members-only list"? :). Thanks! > > My member ID is my email address m...@smartbuy.com <mailto:m...@smartbuy.com> > > On Tue, Aug 22, 2017 at 12:12 PM, Mike Ngo <m...@smartbuy.com > <mailto:m...@smartbuy.com>> wrote: > Hi, Patrick. > > I see your response earlier regarding the C6220 PSU mismatch errors from the > link below and we thank you for that. However, I believe our current FCB is > v1.25 > > http://lists.us.dell.com/pipermail/poweredgec-tools/2014-July/000268.html > <http://lists.us.dell.com/pipermail/poweredgec-tools/2014-July/000268.html> > > We've just recently received these PSU errors. Could you please help shed > some light as I couldn't figure it out what they are and how to resolve it. > The User's Manual doesn't say much. So does it mean the PSU1 is bad and > needed to be replaced? Thanks a bunch! > > PSU 1 Status: Power Supply sensor, Power Supply input lost (AC/DC) was > asserted > > PSU Mismatch: Power Supply sensor, Configuration error was asserted > > PSU Redundancy: Power Supply sensor, Redundancy Lost was asserted > > (See attached pic) > > > -- > > Sincerely Yours, > > Mike Ngo > SmartBuy.com > V: +1.714.532.4000 <> > F: +1.206.333.0326 <> > > This electronic message transmission contains information from SmartBuy that > may be proprietary, confidential and/or privileged. The information is > intended only for the use of the individual(s) or entity named above. If you > are not the intended recipient, be aware that any disclosure, copying or > distribution or use of the contents of this information is prohibited. If > you have received this electronic transmission in error, please notify the > sender immediately by replying to the address listed in the "From:" field. > > > > -- > > Sincerely Yours, > > Mike Ngo > SmartBuy.com > V: +1.714.532.4000 <> > F: +1.206.333.0326 <> > > This electronic message transmission contains information from SmartBuy that > may be proprietary, confidential and/or privileged. The information is > intended only for the use of the individual(s) or entity named above. If you > are not the intended recipient, be aware that any disclosure, copying or > distribution or use of the contents of this information is prohibited. If > you have received this electronic transmission in error, please notify the > sender immediately by replying to the address listed in the "From:" field. > _______________________________________________ > Poweredgec-tools mailing list > Poweredgec-tools@dell.com > https://lists.us.dell.com/mailman/listinfo/poweredgec-tools
_______________________________________________ Poweredgec-tools mailing list Poweredgec-tools@dell.com https://lists.us.dell.com/mailman/listinfo/poweredgec-tools
