Fort Calhoun is similar to Robinson also. From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, September 10, 2010 8:14 AM To: [email protected] Subject: Re: Powernet: sensitivity question ?
Comanche Peak is similar to Robinson ________________________________ From: [email protected] To: '[email protected]' Sent: Fri Sep 10 07:56:20 2010 Subject: RE: Powernet: sensitivity question ? Robinson requires smears from areas outside RCA to be counted on a proportional counter (Tennelec) which gives a MDA in this “ballpark” but otherwise we don’t have a specific MDA requirement in contamination survey procedure. From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, September 10, 2010 8:40 AM To: [email protected] Subject: Powernet: sensitivity question ? At Cook we currently have the following step in our survey procedure, but no one can remember why we implemented that requirement. IF the survey is being performed in an area outside of the Restricted Area, THEN smears shall be analyzed on an instrument that can attain an MDA of less than or equal to 100 dpm. Does anyone else have a sensitvity requirement for instruments used for surveys performed outside their RCA ? Thank You Hal Springer ---------------------------------------------------------------- This e-mail message and all attachments transmitted with it from the Nuclear Generation Group of American Electric Power are for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Confidentiality Notice: This email message, including any attachments, contains or may contain confidential information intended only for the addressee. If you are not an intended recipient of this message, be advised that any reading, dissemination, forwarding, printing, copying or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by reply message and delete this email message and any attachments from your system. This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
