Braidwood does not use RM-20s Amanda L. Stenson Exelon Corp - Braidwood NPS RP Technical Specialist (815)417-2712
_____________________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, February 08, 2012 9:06 AM To: [email protected] Cc: [email protected] Subject: RM-20 Calibration We are in the process of rewriting all RP procedures at Palo Verde. A question has risen to the method of calibration of the Eberline / Thermo RM-20 frisker. In the instrument tech manual, it references the placement of the gain switch (P/GM switch) into the P position when performing a calibration utilizing a mini pulser. Previous procedures kept the switch in the GM position during the calibration. We would like to know if your calibration procedures / process have you perform the calibration with this switch in the P position or the GM position? ----------------------------------------- ************************************************** This e-mail and any of its attachments may contain Exelon Corporation proprietary information, which is privileged, confidential, or subject to copyright belonging to the Exelon Corporation family of Companies. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. Thank You. **************************************************
