Hi Rondan, i have the same machine and also the same problems with wd0 timeouts. Pops up randomly, somethimes under heavy load, sometimes while doing basically nothing (like in your case). Haven't gotten any further on this, as i can't find any deeds about it. I also can't use more than 1,6G of RAM, although there's more in the machine. I have the same machine running with FreeBSD with no hardware problems whatsoever, but OpenBSD doesn't want to for some reason :/ Can't say anything about video though as i don't intend to run X on it.
Cheers, schojo 2018-03-01 19:19 GMT+01:00 Rino Rondan <rron...@itrestauracion.com.ar>: > Hi!! > I decide to test openbsd in my macppc > > restaurador# sysctl hw > hw.machine=macppc > hw.model=970MP (Revision 0x101) > hw.ncpu=2 > hw.byteorder=4321 > hw.pagesize=4096 > hw.disknames=wd0:03c5614775517f10,cd0: > hw.diskcount=2 > hw.sensors.lmtemp0.temp0=28.50 degC > hw.sensors.maxds0.temp0=29.69 degC (Internal) > hw.sensors.maxtmp0.temp0=38.12 degC (Internal) > hw.sensors.maxtmp0.temp1=51.00 degC (External) > hw.sensors.maxtmp1.temp0=36.00 degC (Internal) > hw.sensors.maxtmp1.temp1=34.50 degC (External) > hw.cpuspeed=2000 > hw.vendor=Apple Computer, Inc. > hw.product=PowerMac11,2 > hw.physmem=2684354560 > hw.usermem=2684342272 > hw.ncpufound=2 > hw.allowpowerdown=1 > It was my first time using openfirmware, I do not have any problem with > installation and boot process but I had issues with sata disk and video > driver. > > An output of a dimes after machine crash (12 hours running without any > error, only two tty with top and other with irrsi in text mode) > > restaurador# dmesg > [ using 1151580 bytes of bsd ELF symbol table ] > console out [NVDA,Display-A] console in [keyboard], using USB > using parent NVDA,Parent:: memaddr 98000000, size 8000000 : consaddr > 98020000 : ioaddr 92000000, size 1000000: width 1024 linebytes 1024 height > 768 depth 8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2018 OpenBSD. All rights reserved. > https://www.OpenBSD.org > > OpenBSD 6.2-current (GENERIC.MP) #12: Mon Feb 26 21:33:13 MST 2018 > dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC.MP > real mem = 2684354560 (2560MB) > avail mem = 2015129600 (1921MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: model PowerMac11,2 > cpu0 at mainbus0: 970MP (Revision 0x101): 2000 MHz > cpu1 at mainbus0: 970MP (Revision 0x101): 2000 MHz > mem0 at mainbus0 > spdmem0 at mem0: 256MB DDR2 SDRAM non-parity PC2-4200CL5 > spdmem1 at mem0: 256MB DDR2 SDRAM non-parity PC2-4200CL5 > spdmem2 at mem0: 1GB DDR2 SDRAM non-parity PC2-4200CL4 > spdmem3 at mem0: 1GB DDR2 SDRAM non-parity PC2-4200CL4 > memc0 at mainbus0: u4 rev 0x42 > kiic0 at memc0 offset 0xf8001000 > iic0 at kiic0 > lmtemp0 at iic0 addr 0x4a: ds1775 > maxds0 at iic0 addr 0x4b: ds1631 > maxtmp0 at iic0 addr 0x4c: max6690 > maxtmp1 at iic0 addr 0x4e: max6690 > "dart" at memc0 offset 0xf8033000 not configured > openpic0 at memc0 offset 0xf8040000: version 0x4614 feature 7b0302 BE > mpcpcibr0 at mainbus0 pci: u4-pcie > pci0 at mpcpcibr0 bus 0 > vgafb0 at pci0 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2, mmio > wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > ht0 at mainbus0: u3-ht, 10 devices > pci1 at ht0 bus 0 > hpb0 at pci1 dev 7 function 0 "Apple Shasta PCI" rev 0x00: 85 sources > pci2 at hpb0 bus 2 > ppb0 at pci1 dev 1 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3 > pci3 at ppb0 bus 4 > ppb1 at pci1 dev 2 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3 > pci4 at ppb1 bus 5 > bge0 at pci4 dev 4 function 0 "Broadcom BCM5780" rev 0x03, BCM5714 B3 > (0x8003): irq 66, address 00:14:51:68:33:0e > brgphy0 at bge0 phy 1: BCM5780 10/100/1000baseT/SX PHY, rev. 0 > bge1 at pci4 dev 4 function 1 "Broadcom BCM5780" rev 0x03, BCM5714 B3 > (0x8003): irq 67, address 00:14:51:68:33:0f > brgphy1 at bge1 phy 1: BCM5780 10/100/1000baseT/SX PHY, rev. 0 > ppb2 at pci1 dev 3 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3 > pci5 at ppb2 bus 6 > ppb3 at pci1 dev 4 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3 > pci6 at ppb3 bus 7 > ppb4 at pci1 dev 5 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3 > pci7 at ppb4 bus 8 > ppb5 at pci1 dev 6 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3 > pci8 at ppb5 bus 9 > ppb6 at pci1 dev 8 function 0 "Apple Shasta PCI" rev 0x00 > pci9 at ppb6 bus 1 > macobio0 at pci9 dev 7 function 0 "Apple Shasta" rev 0x00 > macgpio0 at macobio0 offset 0x50 > "smu-doorbell" at macgpio0 offset 0x12 not configured > "smu-interrupt" at macgpio0 offset 0xd not configured > "programmer-switch" at macgpio0 offset 0xc not configured > "chip-fault" at macgpio0 offset 0xe not configured > "slewing-done" at macgpio0 offset 0x38 not configured > "mlb-good" at macgpio0 offset 0x13 not configured > "vdnap0" at macgpio0 offset 0x14 not configured > "timebase-enable" at macgpio0 offset 0x26 not configured > "amp-mute" at macgpio0 offset 0x30 not configured > "dig-hw-reset-c" at macgpio0 offset 0x9 not configured > "codec-error-irq" at macgpio0 offset 0x32 not configured > "codec-clock-mux" at macgpio0 offset 0x31 not configured > "headphone-detect" at macgpio0 offset 0x2c not configured > "headphone-mute" at macgpio0 offset 0x2f not configured > "hw-reset" at macgpio0 offset 0xa not configured > "lineout-detect" at macgpio0 offset 0x28 not configured > "linein-detect" at macgpio0 offset 0x2a not configured > "lineout-mute" at macgpio0 offset 0x2e not configured > "escc-legacy" at macobio0 offset 0x12000 not configured > zs0 at macobio0 offset 0x13000: irq 23,24 > zstty0 at zs0 channel 0 > zstty1 at zs0 channel 1 > kiic1 at macobio0 offset 0x18000 > iic1 at kiic1 > "pcm3052" at iic1 addr 0x46 not configured > "cs8416" at iic1 addr 0x12 not configured > onyx0 at macobio0 offset 0x0: irq 28,11,12 > "timer" at macobio0 offset 0x15000 not configured > audio0 at onyx0 > ohci0 at pci9 dev 11 function 0 "NEC USB" rev 0x43: irq 70, version 1.0 > ohci1 at pci9 dev 11 function 1 "NEC USB" rev 0x43: irq 70, version 1.0 > ehci0 at pci9 dev 11 function 2 "NEC USB" rev 0x04: irq 70 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev > 2.00/1.00 addr 1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev > 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev > 1.00/1.00 addr 1 > ppb7 at pci1 dev 9 function 0 "Apple Shasta PCI" rev 0x00 > pci10 at ppb7 bus 3 > pciide0 at pci10 dev 12 function 0 "ServerWorks K2 SATA" rev 0x00: DMA > pciide0: using irq 10 for native-PCI interrupt > pciide0: port 0: 1.5Gb/s > wd0 at pciide0 channel 0 drive 0: <WDC WD1600JS-41MVB1> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > pciide0: port 1: PHY offline > kauaiata0 at pci10 dev 13 function 0 "Apple Shasta ATA" rev 0x00 > wdc0 at kauaiata0 irq 38: DMA > atapiscsi0 at wdc0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RW GWA-4165B, C006> ATAPI > 5/cdrom removable > cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 > "Apple Shasta Firewire" rev 0x00 at pci10 dev 14 function 0 not configured > smu0 at mainbus0 > iic2 at smu0 > "smu-sat" at iic2 addr 0x58 not configured > "smu-pulsar" at iic2 addr 0x6a not configured > uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microdia / Sonix > Technology Co., Ltd. USB Keyboard" rev 2.00/1.06 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub1 port 2 configuration 1 interface 1 "Microdia / Sonix > Technology Co., Ltd. USB Keyboard" rev 2.00/1.06 addr 2 > uhidev1: iclass 3/1, 6 report ids > uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid2 at uhidev1 reportid 3: input=1, output=0, feature=0 > ukbd1 at uhidev1 reportid 4: 48 variable keys, 0 key codes > wskbd1 at ukbd1 mux 1 > wskbd1: connecting to wsdisplay0 > ukbd2 at uhidev1 reportid 5: 56 variable keys, 0 key codes > wskbd2 at ukbd2 mux 1 > wskbd2: connecting to wsdisplay0 > ukbd3 at uhidev1 reportid 6: 56 variable keys, 0 key codes > wskbd3 at ukbd3 mux 1 > wskbd3: connecting to wsdisplay0 > uhidev2 at uhub2 port 2 configuration 1 interface 0 "Primax Electronics > Apple Optical USB Mouse" rev 1.10/1.10 addr 2 > uhidev2: iclass 3/1 > ums0 at uhidev2: 4 buttons, Z and W dir > wsmouse0 at ums0 mux 0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > bootpath: /ht/pci@9/k2-sata-root/k2-sata@0/disk@0:/bsd > root on wd0a (03c5614775517f10.a) swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > WARNING: unable to get date/time -- CHECK AND RESET THE DATE! > > I have random problem with disk, several time appear messages like : > wd0a : device timeout writing fsbn ......number..... of .....number...... > Never come back after that and sometime the cooler run more faster and > server hang. > I think I need to test boot or install with external disk to check if the > problem is with my sata cable , maybe sata driver. Normally if do several > I/O task the server crash in one hour but I uses normal without less I/O > will work fine but sometime crash. > > And other issue is VIDEO, I want to use xorg with standard values, > I read /usr/X11R6/README, wsbf works for me. > vgafb0 at pci0 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2, mmio > > I test my own xorg.conf and wsbf works but start in Depth 1 in monochrome > status. > > Any suggestions to configure my box ¿? > > Regards > > --- > Rondan Rino > [Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification) > LPI ID:LPI000209832 > Verification Code:gbblvwyfxu > [Red Hat Certified Engineer -- RHCE -- RHCVA](https://www.redhat.com/ > rhtapps/certification/verify/?certId=120-175-658) > > Phone:+1210 888 0738 > > Blog:[http://www.itrestauracion.com.ar](http://www.itrestauracion.com.ar/) > Cv:[ http://cv.rinorondan.com.ar](http://www.rinorondan.com.ar/) > [http://counter.li.org](http://counter.li.org/) Linux User -> #517918 > Viva La Santa Federacion!! > Mueran Los Salvages Unitarios!! > ^^^Transcripcion de la epoca ^^^ > > Sent from [ProtonMail](https://protonmail.ch), encrypted email based in > Switzerland. >
