Martin wrote: >> Running 3 threads of "small FFT test" works fine, nothing unusual to >> report. >> Running 3 threads of "large FFT test" makes the system hang after a >> couple of minutes. >> Running 3 threads of "blend" makes the system reboot after >> 30-60seconds. > > OK, the interesting bit is whether you get those same results > independent of _which_ core you disable. > > Can you test for when you have core #0 disabled, then with core #1 > disabled and so on? > > The suspicions are that you might see core #2 fail sooner than the > others...
Ah, I see - we're looking for (possibly) bad core. Yep, I'll do the tests again with different cores off-line. > I think the most useful tests will be when you have a known good > heatsink contact! I'll re-seat the whole thing before I start. What you and David suggested about pockets of air between the CPU and the heatsink makes perfect sense. /Per Jessen, Zürich _______________________________________________ Prime mailing list [email protected] http://hogranch.com/mailman/listinfo/prime
