David
try damping a whole shhet of paper with windolene [the transparent
stuff] it seems that the inks are pretty much water based but that the
bit of ammonia helps too.
You don't want it dripping inside the machine so just dampen it well.
Now paper feed it through a few times, with luck you'll see some
residue on the sheet, try new sheeets until it's clean.
On 17/11/02 at , David Townend <[EMAIL PROTECTED]> wrote:
> Hi List,
> I'm being frustrated by 'tram lines' of black ink (corresponding to the
> position of the rollers. I have tried cleaning the rollers (with q-tips) and
> the white roller mount / holder, where a build up of black ink corresponding
> to the tram-lines is seen to be building up, but even before one print is
> completed the tram lines are back.
Regards
NeilB
- - - - Consulting in Imaging & Colour Management - - - -
custom scanner and printer profiles, training on Trident & Imacon Scanning
- - - - - we supply Gretag and eyeOne, also XRite & OptiCal - - - - - -
p:44 (0)1273 774704 m:44 (0)7778 160201 http://www.neilbarstow.co.uk/
http://www.apple.com/uk/creative/neilbarstow/
===============================================================
GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
